Black & Decker FP1700B User Manual - Page 9
Care and Cleaning - blade
View all Black & Decker FP1700B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
ENGLISH Care and Cleaning This product contains no user serviceable parts. Refer service to qualified service personnel. Note: Do not attempt to sharpen the cutting edges of the chopping blade or slicing and shredding disk. They are permanently sharpened at the factory and will be ruined if sharpened. CLEANING Note: Before cleaning, be sure unit is turned off and cord is unplugged. • Completely disassemble processor parts before washing. • Rinse parts immediately after processing for easy cleanup. Caution: The slicing and shredding disk is very sharp. Use caution when handling and storing. • Wipe base and feet with a damp cloth and dry thoroughly. Stubborn spots can be removed by rubbing with a damp cloth and a mild, nonabrasive cleaner. Do not immerse base in liquid. • All removable parts can be washed by hand or in a dishwasher. Hand washing of plastic parts will help to maintain the food processor's appearance. • If washing by hand, fill workbowl with hot, soapy water and rapidly raise and lower the chopping blade or slicing and shredding disk up and down on the center shaft. Caution: The slicing and shredding disk is very sharp. Use caution when handling and storing. • If washing in a dishwasher, place removable parts on top rack only-not in or near utensil basket. • Some staining of parts may occur. If so, make a paste of 2 tablespoons of baking soda and 1 tablespoon of water. Apply to stains and let stand overnight. Rinse and dry. • Do not use rough scouring pads or cleansers on any plastic or metal parts to clean. • Do not allow chopping blade or slicing and shredding disk to soak in water for long periods of time. • Remember to clean the internal shaft of the chopping blade; use a baby bottle brush to remove any clogged food particles. • If you are having trouble closing the cover over the workbowl, apply a small amount of vegetable oil to the rim of the cover and workbowl. This should make the pieces work smoother when attaching the cover to the workbowl. 9