Black & Decker HCUA525BA Instruction Manual - Page 8

Adjustable suction force Fig. I, Powered rotary brush and LED Fig. J, Z, Removing and attaching

Get Black & Decker HCUA525BA PDF manuals and user guides View all Black & Decker HCUA525BA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

English State of charge indicator Allows you to monitor the level of power being used. BATTERYSENSOR Indicator The LED battery indicator displays the remaining charge and warns you when the battery is low. The final LED will flash continuously when there is only 1 minute of runtime remaining. All LEDs will flash when the unit is discharged. Powered rotary brush and LED (Fig. J, Z) • To engage the rotary brush 39 (Fig. Z) inside the floor head 7 , depress the rotary brush ON/OFF button 38 as shown in Figure J. When the rotary brush is ON the LED work light will illuminate to better see debris as you vacuum. • To disengage the rotary brush 39 , depress the rotary brush ON/OFF button 38 a second time. Fig. J 38 FILTERSENSOR Smart sensor technology automatically detects (the symbol will light red) when the filter becomes clogged and needs to be cleaned. Fig. H 35 Adjustable suction force (Fig. I) The appliance has an adjustable suction slider 37 . The vacuum can be adjusted to operate at a lower suction level to extend run time or higher suction level to pick up debris that requires more power. • To increase suction slide your finger on the adjustable suction slider 37 to the right as shown in Figure I. Corresponding LEDs on the min/max indicator will display the selected suction force. • To decrease suction slide your finger on the adjustable suction slider 37 to the left. Fig. I 37 Removing and attaching the lift away canister (Fig. K, L) • To remove the lift away canister from the chassis, press the lift away canister release button 41 to release the lift away canister 5 from the chassis 23 hold the lift away handle 36 and lift out the lift away canister 5 as shown in Figure K. • Release the hose connector 3 from the chassis hose port 6 as shown in Figure L. • To attach the lift away canister to the chassis, hold the main lift off handle 36 and place the lift away canister 5 onto the chassis and slide downward so the canister locks into position as shown in Figure K. • Connect the hose connector 3 to the chassis hose port 6 as shown in Figure L. Fig. K 36 41 5 23 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
ENGLISH
6
State of charge indicator
Allows you to monitor the level of power being used.
BATTERYSENSOR Indicator
The LED battery indicator displays the remaining charge and warns you
when the battery is low. The final LED will flash continuously when
there is only 1 minute of runtime remaining. All LEDs will flash when
the unit is discharged.
FILTERSENSOR
Smart sensor technology automatically detects (the symbol will light
red) when the filter becomes clogged and needs to be cleaned.
Fig. H
35
Adjustable suction force (Fig. I)
The appliance has an adjustable suction slider
37
. The
vacuum can be adjusted to operate at a lower suction level
to extend run time or higher suction level to pick up debris
that requires more power.
•
To increase suction slide your finger on the adjustable
suction slider
37
to the right as shown in Figure I.
Corresponding LEDs on the min/max indicator will
display the selected suction force.
•
To decrease suction slide your finger on the adjustable
suction slider
37
to the left.
Fig. I
37
Powered rotary brush and LED (Fig. J, Z)
•
To engage the rotary brush
39
(Fig. Z) inside the floor
head 
 7 
, depress the rotary brush ON/OFF button
38
as shown in Figure J. When the rotary brush is ON the
LED work light will illuminate to better see debris as
you vacuum.
•
To disengage the rotary brush
39
, depress the rotary
brush ON/OFF button 
38
a second time.
Fig. J
38
Removing and attaching the lift away
canister (Fig. K, L)
•
To remove the lift away canister from the chassis,
press the lift away canister release button 
41
to release
the lift away canister 
5
from the chassis 
23
hold the lift
away handle 
36
and lift out the lift away canister 
5
as
shown in Figure K.
•
Release the hose connector 
3
from the chassis hose
port 
6
as shown in Figure L.
•
To attach the lift away canister to the chassis
, hold
the main lift off handle 
36
and place the lift away
canister 
 5
onto the chassis and slide downward so the
canister locks into position as shown in Figure K.
•
Connect the hose connector 
3
to the chassis hose
port 
 6
as shown in Figure L.
Fig. K
41
23
36
5