Black & Decker HHVI320JRS02 Instruction Manual - Page 6

clockwise direction. • Place filters back into the bowl pressing firmly to ensure a secure fit. • To replace dust bowl, place it back onto the handle until it "clicks" firmly into position. Nozzle / Accessories (HHVI320JR, HHVI320JRS, and HHVI325JR) • Figure L - A crevice tool is built into the nozzle and can be extended as shown in figure L by pulling the extension piece until it locks into position. Fitting • Insert the appropriate accessory into the front of the appliance as show in Figure O. • Make sure the accessory is fully pushed in. O L • Figure M - A brush accessory is built into the nozzle and can be flipped upwards for use. M • Figure N - The nozzle can be rotated for better access in tight spots. To rotate the nozzle press the button shown in figure M and rotate the nozzle to the left or right until it clicks into place. N Scented filter (HHVI320JRS) BEFORE FIRST USE - remove bag from the scented pre-filter. Reassemble per instructions above. When the vacuum is turned on, the plastic scented filter will emit an aroma to freshen the air. WARNING: · May cause mild skin irritation. Please ensure you wear gloves when handling the scented filter. · Toxic to aquatic life. · Harmful to aquatic life with long lasting effects. · Avoid release to the environment. · Dispose of content / container to an approved waste disposal plant. NOTE: When the plastic scented filter no longer lets off the aroma, it can be an indication that the filter needs to be replaced. See below for information on replacement filters. Replacing the filters The filters should be replaced every 6 to 9 months and whenever worn or damaged. Replacement filters are available from your BLACK+DECKER dealer. Visit www.blackanddecker.com to locate dealers. • Remove the old filters as described above. • Fit the new filters as described above. Maintenance Use only mild soap and damp cloth to clean the vac. Never let any liquid get inside the vac; never immerse any part of the vac into a liquid. Assembly Accessories - Figure O (HHVI315JO) Your hand vac may be supplied with some of the following accessories: • A brush tool for furniture and stairs. • A crevice tool for confined spaces. WARNING: Make sure the vacuum is completely dry before using it. IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts. 6