Bosch B18ID80SRS Use & Care Manual - Page 7

Installation - security

Get Bosch B18ID80SRS PDF manuals and user guides View all Bosch B18ID80SRS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Installation d WARNING d Do not install the appliance: - outdoors, - in an environment with dripping water, - in rooms which are at risk of frost. The appliance is very heavy ć for empty weight see the following table: Freezer 18" Freezer 24" Freezer 18" 255 lbs / 115 kg 300 lbs / 135 kg 335 lbs / 150 kg Installation room The appliance should be installed in a dry, well ventilated room. The ambient temperature should not drop below 55 °F (13 °C) or rise above 110 °F (43 °C), otherwise malfunctions may occur. The installation location should not be exposed to direct sunlight and not placed near a heat source, such as an oven, radiator, etc. If installation next to a heat source is unavoidable, use a suitable insulating plate or observe the following minimum distances from the heat source: - 1.2" (3 cm) from an electric cooker, - 12" (30 cm) from an oil or solidĆfuel cooker. Installation cavity It is important to observe the specified dimensions of the installation cavity for a troubleĆfree installation of the appliance and for the subsequent general view of the furniture front. In particular ensure that the cavity is square. Squareness can be checked by suitable means, e.g. spirit level, diagonal measurements, etc. Furniture/fixtures The new appliance will be mounted securely to adjacent and overhead furniture/fixtures. For this reason it is essential that all attachable furniture/fixtures are connected securely to the base or the wall by suitable means. Base To ensure that the appliance is installed securely and functions properly, the base must be flat and level. The base must be made of hard, rigid material. The installation area must be the same height as the rest of the room. On account of the heavy weight of a fully loaded appliance, a loadĆbearing base is required. For the fullyĆloaded weight see the following table: - Freezer 18" 560 lbs / 250 kg - Freezer 24" 780 lbs / 350 kg - Freezer 24" 950 lbs / 425 kg If in doubt, contact an architect or a building expert. Installing and connecting the appliance d CAUTION d Have the appliance installed by an electrician according to the enclosed installation instructions. After installing the appliance, wait at least a half an hour before switching on the appliance. During transit the oil in the refrigeration system may have moved. Before switching on the appliance for the first time, clean the inside of the appliance. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
7
Installation
d
WARNING
d
Do
not
install the
appliance:
-
outdoors,
-
in an
environment
with
dripping
water,
-
in rooms
which
are
at
risk
of
frost.
The
appliance
is
very heavy ć
for
empty
weight
see
the
following
table:
Freezer 18"
255
lbs
/
115
kg
Freezer 24"
300
lbs
/
135
kg
Freezer 18"
335
lbs
/
150
kg
Installation room
The appliance
should
be
installed
in
a
dry,
well ventilated room.
The
ambient
temperature
should
not
drop
below
55
°
F
(13
°
C)
or
rise
above
110
°
F
(43
°
C),
otherwise
malfunctions
may occur.
The
installation
location
should
not
be
exposed to
direct
sunlight
and
not placed near a
heat
source,
such
as
an oven,
radiator,
etc.
If²installation
next
to
a heat
source
is
unavoidable,
use
a
suitable
insulating
plate
or observe
the
following minimum
distances
from
the
heat
source:
-
1.2"
(3
cm) from an
electric
cooker,
-
12" (30
cm) from an
oil or
solidĆfuel cooker.
Installation cavity
It is
important to
observe the
specified
dimensions
of
the
installation cavity
for
a troubleĆfree
installation of
the appliance and
for
the
subsequent general view
of
the
furniture
front.
In
particular
ensure that the cavity
is
square.
Squareness can be checked
by suitable means, e.g. spirit level,
diagonal measurements, etc.
Furniture/fixtures
The
new
appliance will be mounted
securely to
adjacent and
overhead
furniture/fixtures.
For
this
reason it is
essential that all
attachable furniture/fixtures
are
connected
securely
to
the base or
the
wall by
suitable means.
Base
To
ensure that the appliance is
installed securely
and
functions
properly, the base must be flat and
level.
The
base must be made of
hard,
rigid
material.
The
installation area must be the
same
height as
the rest of
the room.
On
account of
the heavy
weight of
a
fully loaded
appliance,
a²loadĆbearing
base is
required.
For²the
fullyĆloaded
weight see the
following table:
- Freezer
18"
560
lbs
/
250
kg
- Freezer
24"
780
lbs
/
350
kg
- Freezer
24"
950
lbs
/
425
kg
If
in
doubt, contact an architect or
a²building
expert.
Installing and
connecting the
appliance
d
CAUTION
d
Have
the appliance installed by an
electrician according
to the
enclosed
installation
instructions.
After
installing
the appliance,
wait
at
least a half
an hour
before
switching
on the appliance. During transit
the
oil in the refrigeration system may
have moved.
Before switching
on the
appliance
for
the first time, clean the
inside
of
the appliance.