Bosch B18IF70NSP Use & Care Manual - Page 11
Setting, temperature, Super, function, Setup
View all Bosch B18IF70NSP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Setting the temperature The SUPER $ symbol and the Super temperature are displayed. To switch to the next menu: The temperature can be set from 7 °F to ć9 °F (ć14 °C to ć23 °C). We recommend a setting of 0 °F (ć18 °C). F The temperature can be changed with the + buttons (warmer) or ć (colder). The temperature can be adjusted in 1 °F (0.5 °C) steps. To adjust the required temperature: q Activate the setup mode with the < or > buttons. The FREEZER symbol is displayed. q Set the required temperature with the + (warmer) or ć (colder) buttons. Super function The Super function is used to freeze large quantities of fresh food and should be switched on some hours before the fresh food is placed in the freezer. In general, 4-6 hours is adequate. If the maximum freezing capacity is used, 24 hours are required. When the Super function is activated, the appliance is cooled as cold as possible to a preset temperature set at the factory. The function is activated by pressing the super button.12. The function is ended: - by pressing the super button again, - by activating the Eco function, - by activating the Vacation mode, - by activating the Sabbath mode. i After approx. 2 ½ days the freezer automatically switches back to the temperature set before Super function. Setup mode There are several menus for adjusting the appliance functions to individual requirements. These adjustments can be made in setup mode. To activate setup mode: q Press the setup button. The first menu (temperature unit) is displayed. q Press the < or > button. The next menu and the current setting (usually On/Off) are displayed. To select between the different setting options within one menu: q Press the + or ć button. i A modified setting is saved when the next menu is selected with the < or > button. To end setup mode: q Press the setup button. All modified settings are saved. i If no button is pressed within 12 seconds, setup mode ends automatically. All modified settings are saved. The required temperature is displayed again. 11