Bosch B22CT80SNS Instructions for Use - Page 10

On/Off, Adjusting Controls, To Adjust Set Point Temperatures, Additional Control Center Features, - filter

Page 10 highlights

On/Off: ■ On/Off turns off cooling for both compartments. It does not disconnect power to the refrigerator. ■ Press and hold On/Off for 3 seconds. The LED will light up to indicate that cooling is Off. Press the button again to turn on the cooling. The LED will turn off. ■ Press Humidity Control again to turn OFF and save energy when the environment is less humid. Adjusting Controls The REFRIGERATOR control adjusts the refrigerator compartment temperature. The FREEZER control adjusts the freezer compartment temperature. If you need to adjust the temperature in either the refrigerator or freezer compartment, use the settings listed in the chart as a guide. To Adjust Set Point Temperatures: The first touch of the (+) or (-) touch pad displays the current temperature set point. ■ Press the (+) or (-) touch pads until the desired temperature set point is displayed. NOTE: Except when first turning on the refrigerator, do not adjust either temperature control more than one setting at a time. Wait 24 hours between adjustments for the temperature to stabilize. Holiday In holiday mode, the freezer switches to a timed defrost cycle that is not dependent on use. Interior lighting and dispensers are disabled. ■ Press and hold the Holiday touch pad for 3 seconds or until the indicator light is lit to turn on this feature. Press and hold the Holiday touch pad again to turn off this feature. The Holiday Icon will disappear, and the screen will display the settings as they were before Holiday was selected. Alarm The Alarm feature sounds a chime every few seconds when the refrigerator door has been left open for 5 continuous minutes. The chime will sound until the door is closed or Alarm is turned off. ■ Press the Alarm to turn this feature ON or OFF. The indicator light will be lit when the Alarm feature is on. CONDITION/REASON: REFRIGERATOR too warm FREEZER too warm/too little ice REFRIGERATOR too cold FREEZER too cold ADJUSTMENT: REFRIGERATOR Control 1° lower Adjust FREEZER Control 1° lower Adjust REFRIGERATOR Control 1° higher Adjust FREEZER Control 1° higher Additional Control Center Features Humidity Control The Humidity Control feature turns on a heater to help reduce moisture on the door hinge seal. Use in humid environments or when you notice moisture on the door hinge seal. The refrigerator uses more energy when Humidity Control is on. ■ Press Humidity Control when the environment is warm and more humid, or if you notice moisture on the door hinge seal. The indicator light will be lit when humidity control is ON. Super The Super feature assists with periods of high refrigerator use, full grocery loads, or temporarily warm room temperatures. ■ Press SUPER to set the freezer and refrigerator to the lowest temperature settings. Press SUPER again to return to the normal refrigerator set point. NOTE: The Super feature will automatically shut off in approximately 12 hours. Filter Reset The Filter Reset control allows you to restart the water filter status tracking feature each time you replace your water filter. See "Water Filtration System." ■ Press and hold the Filter Reset touch pad for 3 seconds, until the Order or Replace light turns off. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

10
On/Off:
On/Off turns off cooling for both compartments. It does not
disconnect power to the refrigerator.
Press and hold On/Off for 3 seconds. The LED will light up to
indicate that cooling is Off. Press the button again to turn on
the cooling. The LED will turn off.
Adjusting Controls
The REFRIGERATOR control adjusts the refrigerator compartment
temperature. The FREEZER control adjusts the freezer
compartment temperature.
If you need to adjust the temperature in either the refrigerator or
freezer compartment, use the settings listed in the chart as a
guide.
To Adjust Set Point Temperatures:
The first touch of the (+) or (-) touch pad displays the current
temperature set point.
Press the (+) or (-) touch pads until the desired temperature
set point is displayed.
NOTE:
Except when first turning on the refrigerator, do not
adjust either temperature control more than one setting at a
time. Wait 24 hours between adjustments for the temperature
to stabilize.
Additional Control Center Features
Humidity Control
The Humidity Control feature turns on a heater to help reduce
moisture on the door hinge seal. Use in humid environments or
when you notice moisture on the door hinge seal. The refrigerator
uses more energy when Humidity Control is on.
Press Humidity Control when the environment is warm and
more humid, or if you notice moisture on the door hinge seal.
The indicator light will be lit when humidity control is ON.
Press Humidity Control again to turn OFF and save energy
when the environment is less humid.
Holiday
In holiday mode, the freezer switches to a timed defrost cycle that
is not dependent on use. Interior lighting and dispensers are
disabled.
Press and hold the Holiday touch pad for 3 seconds or until
the indicator light is lit to turn on this feature. Press and hold
the Holiday touch pad again to turn off this feature. The
Holiday Icon will disappear, and the screen will display the
settings as they were before Holiday was selected.
Alarm
The Alarm feature sounds a chime every few seconds when the
refrigerator door has been left open for 5 continuous minutes. The
chime will sound until the door is closed or Alarm is turned off.
Press the Alarm to turn this feature ON or OFF. The indicator
light will be lit when the Alarm feature is on.
Super
The Super feature assists with periods of high refrigerator use, full
grocery loads, or temporarily warm room temperatures.
Press SUPER to set the freezer and refrigerator to the lowest
temperature settings. Press SUPER again to return to the
normal refrigerator set point.
NOTE:
The Super feature will automatically shut off in
approximately 12 hours.
Filter Reset
The Filter Reset control allows you to restart the water filter status
tracking feature each time you replace your water filter. See
“Water Filtration System.”
Press and hold the Filter Reset touch pad for 3 seconds, until
the Order or Replace light turns off.
CONDITION/REASON:
ADJUSTMENT:
REFRIGERATOR too warm
REFRIGERATOR Control
1° lower
FREEZER too warm/too little ice
Adjust FREEZER
Control 1° lower
REFRIGERATOR too cold
Adjust REFRIGERATOR
Control 1° higher
FREEZER too cold
Adjust FREEZER
Control 1° higher