Bosch B24IW50NSP Installation Instructions

Bosch B24IW50NSP Manual

Bosch B24IW50NSP manual content summary:

  • Bosch B24IW50NSP | Installation Instructions - Page 1
    INSTALLATION INSTRUCTIONS INSTRUCTIONS D'INSTALLATION INSTRUCCIONES DE INSTALACIÓN Single Door Models Modèles à une porte Modelos de una puerta
  • Bosch B24IW50NSP | Installation Instructions - Page 2
    2
  • Bosch B24IW50NSP | Installation Instructions - Page 3
    instruction 8 Connecting the water 8 Installation dimensions 9 Single installation 9 SideĆbyĆSide installation 10 Water connection 11 Appliance dimensions 12 1. 18" Appliance (Freezer/Freezer with Ice and Water dispenser 12 2. 18" Appliance (Wine unit 13 3. 24" Appliance (Refrigerator
  • Bosch B24IW50NSP | Installation Instructions - Page 4
    Installation instructions 18 1. Checking the installation cavity 18 2.. Transport of the appliance 18 3. Removing the packaging 19 4. Preparing the appliance 19 5. Changing over the door hinges 20 6. Preparing the installation cavity 22 7. Attaching an alternative antiĆtip device 24 8.
  • Bosch B24IW50NSP | Installation Instructions - Page 5
    the installation, always read this installation manual in full. It contains important details which the fitter must observe. Provided this manual is read thoroughly, the installation will be simple, troubleĆfree and, most importantly, safe. Repairs should be made by a qualified service technician
  • Bosch B24IW50NSP | Installation Instructions - Page 6
    4. i Note - When dimensioning the partition for model 4, note the thickness of the furniture fronts to prevent damage if the doors are opened at the same in the cavity. The dimensions of the side panel are taken from the opposite cavity wall. During installation ensure that the cavity is square and
  • Bosch B24IW50NSP | Installation Instructions - Page 7
    ) from an electric cooker, - 12" (300 mm) from an oil or solidĆfuel cooker. Installation cavity It is important to observe the specified dimensions of the installation cavity for a troubleĆfree installation of the appliance and for the subsequent general view of the furniture front. i In particular
  • Bosch B24IW50NSP | Installation Instructions - Page 8
    to follow these instructions can result Refrigerator 30" Freezer 18" (incl. IceMaker) Freezer 24" (incl. IceMaker) Freezer 30" (incl. IceMaker) Maximum load at one time 2 Ampere 2 Ampere 3.5 Ampere 4 Ampere 4.5 Ampere Orient ground prong to the bottom as shown in the pictures. For the installation
  • Bosch B24IW50NSP | Installation Instructions - Page 9
    the water connection B Area for installation of the power connection D Opening depth of niche, depending on kitchen design (see DESIGN GUIDE) D = 24" (610 mm) minimum NOTE: Cavity must be suare. Side wall of the cavity must be flush. Appliance 18" 24" 30" X 18" (457 mm) 24 (610 mm) 30" (762
  • Bosch B24IW50NSP | Installation Instructions - Page 10
    for the two appliances. Example: Freezer 18" / Refrigerator 30" Legend: A Area for installation of the water connection B Area for installation of the power connection 10 D Opening depth of niche, depending on kitchen design (see DESIGN GUIDE) D = 24" (610 mm) minimum NOTE: Cavity must be suare
  • Bosch B24IW50NSP | Installation Instructions - Page 11
    Water connection The supply pipe can be located a) at the side on the right, b) at the side on the left or c) underneath. 11
  • Bosch B24IW50NSP | Installation Instructions - Page 12
    a) Adjustment in levelling legs +13/8" (35 mm) / -1/2" (13 mm). b) Dimensions may vary. c) Thickness of door panel may vary. d) This dimension may vary depending on installation, panel thickness and kitchen hardware. 12 e) Unit dimensions Note: One design of the wooden panel displayed. For further
  • Bosch B24IW50NSP | Installation Instructions - Page 13
    (Wine unit) e) e) Front view (without door panel) Legend: a) Adjustment in levelling legs +13/8" (35 mm) / -1/2" (13 mm). b) Dimensions may vary. c) Thickness of door panel may vary. d) This dimension may vary depending on installation, panel thickness and kitchen hardware. e) Unit dimensions
  • Bosch B24IW50NSP | Installation Instructions - Page 14
    (Refrigerator/Freezer/Freezer with Ice and Water dispenser) e) e) Front view (without door panel) Legend: a) Adjustment in levelling legs +13/8" (35 mm) / -1/2" (13 mm). b) Dimensions may vary. c) Thickness of door panel may vary. d) This dimension may vary depending on installation, panel
  • Bosch B24IW50NSP | Installation Instructions - Page 15
    4. 24" Appliance (Wine unit) e) e) Front view (without door panel) Legend: a) Adjustment in levelling legs +13/8" (35 mm) / -1/2" (13 mm). b) Dimensions may vary. c) Thickness of door panel may vary. d) This dimension may vary depending on installation, panel thickness and kitchen hardware. e)
  • Bosch B24IW50NSP | Installation Instructions - Page 16
    (Refrigerator/Freezer/Freezer with Ice and Water dispenser) e) e) Front view (without door panel) Legend: a) Adjustment in levelling legs +13/8" (35 mm) / -1/2" (13 mm). b) Dimensions may vary. c) Thickness of door panel may vary. d) This dimension may vary depending on installation, panel
  • Bosch B24IW50NSP | Installation Instructions - Page 17
    and tools 1. Supplied accessories - Installation instructions - Operating instructions - Installation kit 2. Optional accessories8. Basic Combination SideĆbyĆSide Sealing kit For permanent connection of two individual appliances, e. g. Freezer next to Refrigerator. Extreme Combination SideĆbyĆSide
  • Bosch B24IW50NSP | Installation Instructions - Page 18
    requirements. Before starting the installation, check that the installation cavity complies with all requirements for a safe and troubleĆfree installation. q Check the base. Follow the instructions in the section on Installation location" on page 7. q Check the dimensions of the cavity. q Check
  • Bosch B24IW50NSP | Installation Instructions - Page 19
    - The appliance is very heavy. - When opening the appliance door, the appliance may tip forwards. Be careful, otherwise people who are helping may be injured or the appliance may be damaged. To protect the base from damage during installation: q Attach a residual piece of carpet, lino, etc. to the
  • Bosch B24IW50NSP | Installation Instructions - Page 20
    hinge, release the spring ć risk of injury! The door hinges may have to be changed over depending on the installation situation. i If it is not necessary to change over the door hinges, continue with the next installation step. q Unscrew the door. q Release the spring on the hinge. Loosen the
  • Bosch B24IW50NSP | Installation Instructions - Page 21
    q Change over the hinge angle. q Fix the hinges on the appliance. Change the hinges crosswise! q Fit the plastic part of the grill. q Mount the grill completely. q Fix the door. q Change over the fixation parts on the door. q Span the spring on the hinge. Tighten the screw from 0 to I. 21
  • Bosch B24IW50NSP | Installation Instructions - Page 22
    or appliance combination (SideĆbyĆSide). q Specify the attachment points of the antiĆtipĆbrackets. Specify the detailed dimensions according to the section on Installation dimensions" starting on page 9. d WARNING d Assure that there are no electrical wires or plumbing in the area which the
  • Bosch B24IW50NSP | Installation Instructions - Page 23
    ). q Attach the antiĆtipĆbracket completely. Be sure screws hold tight. q Manually insert the screw into the wall plug until the screw begins to resist. q wear safety glasses and other necessary protective devices or apparel when installing or working with anchors ć risk of injury! Not recommended
  • Bosch B24IW50NSP | Installation Instructions - Page 24
    Ćoff valve according to the instructions supplied by the manufacturer of the ice maker installation kit. q Install the connecting pipe. Always observe the indicated gap dimensions to prevent damage to the according to the cavity width, thereby ensuring that the beam can be attached securely. 24
  • Bosch B24IW50NSP | Installation Instructions - Page 25
    Attaching the edge protection 10.SideĆbyĆSide installation i If a sideĆbyĆside installation is intended, now connect the two appliances together. See the Installation Manual for the SideĆbyĆSide kits. q To protect the corners of the installation cavity, attach the supplied protective brackets with
  • Bosch B24IW50NSP | Installation Instructions - Page 26
    the appliance with the furniture fronts. Place markingĆout level over the installation aid parts on the door. i The installation aid parts on the door have been designed for the following total thickness of furniture doors: - ¾" (19 mm) - 1½" (38 mm) Always take account of the possible differing
  • Bosch B24IW50NSP | Installation Instructions - Page 27
    according to point 6 of this installation manual, rotate the appliance all the way towards the wooden beam. 13. Attaching the appliance to the top of the cavity q Unscrew the heightĆadjustable feet until the mark on the base has reached the indicated guide dimension (1¼" / 32 mm). i It is very
  • Bosch B24IW50NSP | Installation Instructions - Page 28
    appliance i When connecting the water pipe to the solenoid valve of the appliance, follow the instructions supplied by the manufacturer of the ice maker installation kit enclosed with the installation manual. d CAUTION d When bending the water pipe, do not kink it, otherwise there is a risk of
  • Bosch B24IW50NSP | Installation Instructions - Page 29
    1. 2. 3. 16. Attaching the toe kick panel d CAUTION d The maximum height of the toe kick panel is 4" from the top of the floor. Do not cover ventilation slots in the base panel. Risk of damage to the appliance. q If required, cut the toe kick panel to the required length. q Remove the cap
  • Bosch B24IW50NSP | Installation Instructions - Page 30
    the following working steps and thus the appearance of the overall kitchen front later on, the appliance should now be operated. q Open the appliance door. q Press the POWER button. Only for appliances with a water connection: ! NOTE ! In order to avoid the risk of damage caused by leaking water
  • Bosch B24IW50NSP | Installation Instructions - Page 31
    the thickness of the furniture front. - To prevent damage, protect surfaces of the furniture doors during installation. The total weight of the furniture front must not exceed the following values: 18" 37 lbs / 17 kg 24" 50 lbs / 23 kg 30" 64 lbs / 29 kg The furniture fronts are attached
  • Bosch B24IW50NSP | Installation Instructions - Page 32
    customer service as an optional accessory, see the section on Optional accessories" on page 17. 20. Attaching the adjusting rail to the furniture door lbs / 10 kg 24" Appliance 33 lbs / 15 kg 30" Appliance 44 lbs / 20 kg q Unscrew the installation support part from the appliance door. i Using the
  • Bosch B24IW50NSP | Installation Instructions - Page 33
    be inserted under each double threaded bolt. q Align the furniture door with the double threaded bolts (Torx screwdriver). * Wine unit - The adjusting rail features a variety of holes for the many different design options of furniture doors. Always screw into the best loadĆbearing material of the
  • Bosch B24IW50NSP | Installation Instructions - Page 34
    over the double threaded bolts. q Screw the nuts a little onto the double threaded bolts. Do not tighten! q Precisely adjust the furniture door. To do this, insert the bracket directly behind the furniture handle into the associated fixing plate. Slide the bracket onto the screw on the appliance
  • Bosch B24IW50NSP | Installation Instructions - Page 35
    the side alignment. Correct by gently tapping the edge of the open furniture door with your hand. q Screw on the lower brackets (Installation kit). Predrill holes in the furniture door! The lower bracket fixes the side position of the door. 1. Loosen the screw. 2. Check the side position of the
  • Bosch B24IW50NSP | Installation Instructions - Page 36
    24. Attaching the finger guard i The number of lower brackets depends on the width and the design of the furniture door. 23. Shorten the finger guard ! IMPORTANT NOTE ! The finger guard must cover the entire height of the door. If doors tightly. q Transfer the door dimensions to the finger guard. q
  • Bosch B24IW50NSP | Installation Instructions - Page 37
    finger guard under the lower hinge with the angle. Slide the cover on the angle. 25. Attaching the covers q Place the cover strips on the door. q Put the vertical cover strip on the finger guard. i The side piece of the cover strip is shorter on the side on which the finger
  • Bosch B24IW50NSP | Installation Instructions - Page 38
    SideĆbyĆSide installation only: q Insert the cover strip into the space between the Ćwater dispenser can be aligned inside the cutout of the furniture door. This allows the dispenser to be aligned parallel to the furniture door in order to obtain an optimum overall appearance. q Remove covers
  • Bosch B24IW50NSP | Installation Instructions - Page 39
    cover frame and the shelf (for freezer unit with iceĆwater dispenser only) q Insert shelf. 28. Attaching the cover strips (for wine storage cupboard only) Note: For 3/4" / 19 mm thick furniture doors: q Slide cover frame onto the iceĆwater dispenser and press in until the frame is flush with the
  • Bosch B24IW50NSP | Installation Instructions - Page 40
    in order to separate the supply and waste air. q Push cover strips on the longitudinal side into the gap between the furniture door and glass pane. q Cut the cover strips on the short sides to the required length. q Shorten the air separator to the required length. q Attach the
  • Bosch B24IW50NSP | Installation Instructions - Page 41
    angle Depending on the installation situation, it may be necessary to adjust the door opening angle. A door opening angle of 115° has been set at the factory. To adjust the door opening angle to 90°: q Open door to 90°. 31. Changing the door spring To adjust the door spring: q Rotate the adjusting
  • Bosch B24IW50NSP | Installation Instructions - Page 42
    42
  • Bosch B24IW50NSP | Installation Instructions - Page 43
    Procédure additionnelle de mise à la terre 49 Instructions de raccordement à la terre 49 Raccordement de l'eau 49 Dimensions d'installation 50 Installation individuelle 50 Installation côte à côte 51 Installation côte à côte 52 Dimensions de l'appareil 53 1. Appareil de 18" (Congelateur/Cong
  • Bosch B24IW50NSP | Installation Instructions - Page 44
    Instructions d'installation 59 1. Vérification de la cavité d'installation 59 2.. Transport de l'appareil 59 3. Enlèvement de l'emballage 60 4. Préparation de l'appareil 60 5. Inversion du sens d'ouverture des portes 60 6. Préparation de la cavité d'installation geĆdoigts 76 24. Fixation du
  • Bosch B24IW50NSP | Installation Instructions - Page 45
    éteinte avant de nettoyer ou d'effectuer des réparations. Les réparations sont réservées à un technicien qualifié du service aprèsĆvente. Les présentes instructions d'installation sont destinées à être utilisées par des installateurs qualifiés. Tous les raccordements de l'eau, de l'électricité et
  • Bosch B24IW50NSP | Installation Instructions - Page 46
    L'importance de respecter tous les règlements et instructions ne saurait être plus instamment soulignée. L'installation devra être confiée à un monteur qualifié. Avant de faire démarrer l'installation, veuillez toujours lire le manuel d'installation dans son intégralité. Il contient des détails
  • Bosch B24IW50NSP | Installation Instructions - Page 47
    panneau latéral, basezĆvous sur les dimensions du panneau opposé formant la cavité. Pendant l'installation, veillez à ce que la cavité à vin 18" Cave à vin 24" (* sans distributeur d'eau) env. 300 lbs/135 kg env. 364 lbs/160 kg Local d'installation Il faudra installer l'appareil dans une pièce
  • Bosch B24IW50NSP | Installation Instructions - Page 48
    du meuble soit esthétique, il est important que la cavité d'installation ait bien les dimensions spécifiées. i AssurezĆvous en particulier que la cavité suivant : Réfrigérateur 24" Réfrigérateur 30" env. 890 lbs/400 kg env. 1110 lbs/500 kg Congélateur 18" Congélateur 24" Congélateur 30" env
  • Bosch B24IW50NSP | Installation Instructions - Page 49
    supportant un ampérage de 10A ou plus. Veuillez à ce titre respecter le tableau de correspondances suivant : Appareil Réfrigérateur 24 installation de la prise femelle, veuillez vous reporter à la section «Dimensions d'installation ou conduites d'eau. Instructions de raccordement à du service aprèsĆ
  • Bosch B24IW50NSP | Installation Instructions - Page 50
    Dimensions d'installation Installation individuelle Légende : A représente la zone où installer le raccordement de l'eau B représente la zone où installer le raccordement de l'électricité D profondeur d'ouverture de la cavité, ceci dépendant de la configuration de la cuisine (Voir le GUIDE DE
  • Bosch B24IW50NSP | Installation Instructions - Page 51
    30" Légende : A Représente la zone où installer le raccordement de l'eau B Représente la zone où installer le raccordement de l'électricité D Profondeur de la cavité, ceci dépendant de la configuration de la cuisine (Voir le GUIDE DE CONCEPTION) D = 24" (610 mm) minimum REMARQUE : La cavité doit
  • Bosch B24IW50NSP | Installation Instructions - Page 52
    Installation côte à côte Il est possible de placer la conduite d'alimentation a) sur le côté droit (a), b) sur le côté gauche (b) ou c) en dessous (c). 52
  • Bosch B24IW50NSP | Installation Instructions - Page 53
    de l'installation, de l'épaisseur du panneau et du matériel équipant la cuisine. e) Dimensions de l'unité Remarque : Les illustrations ne représentent qu'un style de panneau en bois. Pour obtenir des informations avancées sur les différents styles, veuillez vous reporter au GUIDE DE CONCEPTION
  • Bosch B24IW50NSP | Installation Instructions - Page 54
    de l'installation, de l'épaisseur du panneau et du matériel équipant la cuisine. e) Dimensions de l'unité Remarque : Les illustrations ne représentent qu'un style de panneau en bois. Pour obtenir des informations avancées sur les différents styles, veuillez vous reporter au GUIDE DE CONCEPTION
  • Bosch B24IW50NSP | Installation Instructions - Page 55
    de l'installation, de l'épaisseur du panneau et du matériel équipant la cuisine. e) Dimensions de l'unité Remarque : Les illustrations ne représentent qu'un style de panneau en bois. Pour obtenir des informations avancées sur les différents styles, veuillez vous reporter au GUIDE DE CONCEPTION
  • Bosch B24IW50NSP | Installation Instructions - Page 56
    de l'installation, de l'épaisseur du panneau et du matériel équipant la cuisine. e) Dimensions de l'unité 56 Remarque : Les illustrations ne représentent qu'un style de panneau en bois. Pour obtenir des informations avancées sur les différents styles, veuillez vous reporter au GUIDE DE CONCEPTION
  • Bosch B24IW50NSP | Installation Instructions - Page 57
    de l'installation, de l'épaisseur du panneau et du matériel équipant la cuisine. e) Dimensions de l'unité Remarque : Les illustrations ne représentent qu'un style de panneau en bois. Pour obtenir des informations avancées sur les différents styles, veuillez vous reporter au GUIDE DE CONCEPTION
  • Bosch B24IW50NSP | Installation Instructions - Page 58
    Instructions d'installation - Instructions d'utilisation - Kit d'installation cruciforme) - Embout Torx T20 + support magnétique - Clé à pipe dimensions - Madrier (section minimum 3" x 4") à titre de protection alternative contre le renversement, d'une longueur correspondant à la cavité d'installation
  • Bosch B24IW50NSP | Installation Instructions - Page 59
    installation sûre et sans incident. q Vérifiez le sol. Suivez les instructions figurant à la page 6 dans la section «Lieu d'installation». q Vérifiez la dimension le Redressement dos de l'appareil via la paroi arrière de l'appareil 18" / 457 mm 24" / 610 mm 30" / 762 mm 36" / 914 mm 86" / 2185 mm
  • Bosch B24IW50NSP | Installation Instructions - Page 60
    les surfaces de l'appareil. - Sortez les accessoires fournis ; ils se trouvent dans les pièces de protection de l'emballage. d PRUDENCE d Tant que l'installation n'est pas terminée, ne retirez pas les cales de sécurité qui, pendant le transport, protègent les clayettes et les bacs de rangement
  • Bosch B24IW50NSP | Installation Instructions - Page 61
    q Détendez le ressort sur la charnière. Desserrez la vis en l'amenant de I à 0. q Retirez les charnières. q Retirez le couvercle du boîtier à charnière. q Retirez les pièces de la grille. q Dévissez la porte. 61
  • Bosch B24IW50NSP | Installation Instructions - Page 62
    i ServezĆvous de pièces neuves. q Permutez l'angle de la charnière. q Fixez les charnières sur l'appareil. Permutez les charnières selon un ordre croisé ! q Adaptez la pièce en plastique de la grille. q Montez au complet les pièces de la grille. q Fixez la porte. q Permutez les pièces de
  • Bosch B24IW50NSP | Installation Instructions - Page 63
    appareil ou combinaison d'appareils (côte à côte). q Déterminez les points de fixation des brides antiĆrenversement. Déterminez les dimensions détaillées conformément à la section «Dimensions d'installation», en commençant à partir de la page 8. d AVERTISSEMENT d Veillez à ce qu'il n'y ait aucun fil
  • Bosch B24IW50NSP | Installation Instructions - Page 64
    Application sur plancher en bois Utilisez les vis à bois (5x60 mm et 4x15 mm) fournies avec l'appareil. q Percez des trous de guidage : De 1/8" (3 mm) pour les vis à bois faisant 5x60 mm De 5/64" (2 mm) pour les vis à bois faisant 4x15 mm AssurezĆvous que les vis traversent bien le plancher et pénè
  • Bosch B24IW50NSP | Installation Instructions - Page 65
    la conduite de raccordement contre la vanne de fermeture en respectant les instructions fournies par le fabricant du kit destiné à l'installation du distributeur de glaçons. q Installez la conduite de raccordement. Respectez toujours les dimensions spécifiées pour l'espace libre, ceci pour empêcher
  • Bosch B24IW50NSP | Installation Instructions - Page 66
    q Pour protéger les angles de la cavité, fixez les cornières de protection dans ces angles à l'aide de ruban adhésif. 10. Installation côte à côte i Si vous prévoyez une installation côte à côte, il faut relier maintenant les deux appareil l'un avec l'autre. Veuillez vous reporter au manuel de
  • Bosch B24IW50NSP | Installation Instructions - Page 67
    une queue flexible. q Enlevez le dispositif de protection des angles. 12. Installation et alignement de l'appareil q Alignez l'appareil sur la façade des le sol a atteint la dimension guide indiquée (1¼"/32 mm). i Il est très important de respecter cette dimension pour pouvoir ensuite aligner les
  • Bosch B24IW50NSP | Installation Instructions - Page 68
    les pattes de fixation latérales (en haut) en fonction des conditions d'installation. S'il n'y a pas d'interstice ou seulement un interstice étroit, il assez importante au dessus de l'appareil, montez impérativement un madrier aux dimensions adaptées et sans jeu au dessus de l'appareil. q Fixez le
  • Bosch B24IW50NSP | Installation Instructions - Page 69
    vous raccordez la conduite d'eau à l'électrovanne de l'appareil, respectez les instructions fournies par le fabricant du kit servant à installer le distributeur de glaçons ; ces instructions accompagnent le manuel d'installation. d PRUDENCE d Lorsque vous recourbez une conduite d'eau, ne la
  • Bosch B24IW50NSP | Installation Instructions - Page 70
    16. Fixation du bandeau de socle d PRUDENCE d La hauteur maximale du bandeau de socle est de 4" depuis la surface du plancher. Ne recouvrez pas les ouïes de ventilation que comporte le panneau de base. Risque d'endommager l'appareil. q Si nécessaire, réduisez le bandeau de socle à la longueur
  • Bosch B24IW50NSP | Installation Instructions - Page 71
    proximité de la bande Velcro. 17. Mise en service de l'appareil Pour garantir la précision des étapes la porte, le mieux capable de supporter la charge. - Conservez les accessoires surfaces du meuble pendant l'installation. Le poids total de la façade de meuble 18" 37 lbs/17 kg 24" 50 lbs/23 kg
  • Bosch B24IW50NSP | Installation Instructions - Page 72
    tallique contre leur dos. Ce bandeau est en vente auprès du service aprèsĆvente en tant qu'accessoire en option. Voir la section du matériau de porte la mieux en mesure de supporter la charge. Conservez les accessoires d'aide au positionnement, vous 24" 33 lbs/15 kg Appareil de 30" 44 lbs/20 kg 72
  • Bosch B24IW50NSP | Installation Instructions - Page 73
    ajustage constitue le moyen le plus important pour ajuster la façade du meuble. q De la porte de l'appareil, dévissez la pièce support d'installation. i Conservez les accessoires d'aide au positionnement, vous en aurez encore besoin dans la suite du montage. q Marquez cette distance X au dos de la
  • Bosch B24IW50NSP | Installation Instructions - Page 74
    és à différentes options de configuration des portes de meuble. Vissez toujours dans le matériau de la porte de meuble le mieux en mesure de supporter la charge. 21. Fixation et alignement de la porte de meuble i Les boulons à double filetage sont chargés d'ajuster la façade du meuble en hauteur
  • Bosch B24IW50NSP | Installation Instructions - Page 75
    q Alignez la porte du meuble et contrôlez ce faisant la constance de l'interstice sur tout le périmètre. Si nécessaire, déplacez le rail d'ajustage vers la gauche ou la droite. q Vissez les plaques de fixation (10x) 22. Fixation de la porte de meuble i Maintenant, fixez les poignées du meuble.
  • Bosch B24IW50NSP | Installation Instructions - Page 76
    1. Desserrez la vis. 2. Vérifiez la position latérale de la porte. 3. Vissez la vis à bois. 4. Serrez la vis. 5. Fixez le couvercle sur les brides. q Refermez la porte et vérifiez l'alignement latéral. Corrigez en tapant légèrement avec la main sur le bord de la porte ouverte du meuble. q Serrez
  • Bosch B24IW50NSP | Installation Instructions - Page 77
    contre le bandeau protègeĆdoigts. q A l'aide d'un couteau et d'une règle en acier, raccourcissez le bandeau protègeĆdoigts jusqu'à la longueur requise. 24. Fixation du bandeau protègeĆdoigts q Poussez la coiffe sur la bride et vissez à fond. q Fixez le bandeau protègeĆdoigts sous la charnière
  • Bosch B24IW50NSP | Installation Instructions - Page 78
    geĆdoigts a été fixé. q Fixez le couvercle de l'interrupteur d'éclairage. i Vous pouvez visser le couvercle destiné aux appareils de 24", 30" et 36" contre la porte. Installation côte à côte uniquement: q Placez les bandes couvercles contre la porte. q Insérez la bande couvercle dans l'interstice
  • Bosch B24IW50NSP | Installation Instructions - Page 79
    Appareils individuels uniquement: B A 26. Alignement du distributeur de glaçons et d'eau (seulement pour unité de congélation avec distriĆ buteur de glaçons et d'eau) Il est possible d'aligner en profondeur le distributeur de glaçons et d'eau dans la découpe ménagée dans la porte du meuble. Ceci
  • Bosch B24IW50NSP | Installation Instructions - Page 80
    27. Fixation du cadre enjoliveur et de la tablette (seulement sur unité de congélation avec distributeur de glaçons et d'eau) 28. Fixation des baguettes couvreĆjoint (seulement pour la cave à vin) Remarque : Portes de meuble faisant 3/4" / 19 mm d'épaisseur: q Enfoncez le cadre enjoliveur sur le
  • Bosch B24IW50NSP | Installation Instructions - Page 81
    glaçons : q Il faut découper le séparateur d'air dans la zone du flexible. 30. Ajustage de l'angle d'ouverture de porte Suivant les conditions d'installation, il pourra être nécessaire d'ajuster l'angle d'ouverture de la porte. Un angle d'ouverture de 115° a été ajusté en usine. Pour conférer à la
  • Bosch B24IW50NSP | Installation Instructions - Page 82
    31. Changement du ressort de porte Pour ajuster le ressort de porte : q A l'aide d'un tournevis à empreinte cruciforme, tournez la vis d'ajustage I = Plus forte tension possible du ressort 0 = Pas de tension ressort 82
  • Bosch B24IW50NSP | Installation Instructions - Page 83
    de agua 92 2. Electrodoméstico de 18" (Conservador de vinos 93 3. Electrodoméstico de 24" (Refrigerador/Congelador/Congelador con dispensador de agua 94 4. Electrodoméstico de 24" (Conservador de vinos 95 5. Electrodoméstico de 30" (Refrigerador/Congelador/Congelador con dispensador de
  • Bosch B24IW50NSP | Installation Instructions - Page 84
    . Sujeción y alineación de la puerta del muble 113 22. Sujeción de la puerta del mueble 114 23. Corte de la protección para los dedos 115 24. Montaje de la protección para los dedos 116 25. Montaje de las cubiertas 117 26. Orientación del dispensador de hielo y agua 118 27. Colocación del
  • Bosch B24IW50NSP | Installation Instructions - Page 85
    mecánica, carpintería y fontanería. Fallos en el producto debido a una instalación inadecuada no esta cubiertos por la garantía. Consulte el manual del usuario por la información concerniente a la garantía. e ADVERTENCIA Utilice el electrodoméstico exclusivamente para lo que ha sido previsto. Repare
  • Bosch B24IW50NSP | Installation Instructions - Page 86
    Opciones de instalación Existen diversas opciones de instalación. Están limitadas exclusivamente por el diseño de la cocina y la función de la protección para los dedos. Unidad individual Electrodomésticos individuales con separación 1. 2. SideĆbyĆSide (Lado a lado) * * * ¡Separación
  • Bosch B24IW50NSP | Installation Instructions - Page 87
    n5. d ADVERTENCIA d No instale el electrodoméstico: - a la intemperie, - en un ambiente donde gotee agua, - en ambientes donde existe peligro de heladas. El electrodoméstico es muy pesado. Por los pesos del equipo vacío, consulte la tabla siguiente: Refrigerador de 24" Refrigerador de 30" aprox
  • Bosch B24IW50NSP | Installation Instructions - Page 88
    soporte correspondiente. Rogamos tener en cuenta a tal fin, la tabla siguiente: Electrodoméstico Refrigerador de 24" Refrigerador de 30" Congelador de 18" (incl. fabricador de hielo) Congelador de 24" (incl. fabricador de hielo) Congelador de 30" (incl. fabricador de hielo) Carga simultánea máxima
  • Bosch B24IW50NSP | Installation Instructions - Page 89
    ón de agua B Zona para la conexión a la red de potencia D Altura de la abertura, según el diseño de la cocina (consultar la GUÍA DE DIESEÑO) D = 24" (610 mm) como mínimo Nota: La cavidad debe estar a escuadra. La pared lateral de la cavidad debe ser plana. Electrodoméstico 18
  • Bosch B24IW50NSP | Installation Instructions - Page 90
    agua B Zona para la conexión a la red de potencia 90 D Altura de la abertura, según el diseño de la cocina (consultar la GUÍA DE DIESEÑO) D = 24" (610 mm) como mínimo Nota: La cavidad debe estar a escuadra. La pared lateral de la cavidad debe ser plana.
  • Bosch B24IW50NSP | Installation Instructions - Page 91
    Conexión del agua11. La tubería de alimentación puede ubicarse a) al costado derecho (a), b) al costado izquierdo (b), o c) debajo (c). 91
  • Bosch B24IW50NSP | Installation Instructions - Page 92
    e) Medidas de la unidad Nota: Se visualiza un diseño de panel de madera. Por más información respecto de diferentes estilos, consulte la guía de diseño (DESIGN GUIDE).
  • Bosch B24IW50NSP | Installation Instructions - Page 93
    . e) Medidas de la unidad Nota: Se visualiza un diseño de panel de madera. Por más información respecto de diferentes estilos, consulte la guía de diseño (DESIGN GUIDE). 93
  • Bosch B24IW50NSP | Installation Instructions - Page 94
    3. Electrodoméstico de 24" (Refrigerador/Congelador/Congelador con dispensador de agua) e) e) Vista frontal (sin la puerta) Leyenda a) Ajuste con patas niveladoras + 13/8" (35 mm ño de panel de madera. Por más información respecto de diferentes estilos, consulte la guía de diseño (DESING GUIDE).
  • Bosch B24IW50NSP | Installation Instructions - Page 95
    4. Electrodoméstico de 24" (Conservador de vinos) e) e) Vista frontal (sin la puerta) Leyenda: a) Ajuste con patas niveladoras + 13/8" (35 mm)/- 1/2" (13 mm). b) un diseño de panel de madera. Por más información respecto de diferentes estilos, consulte la guía de diseño (DESIGN GUIDE). 95
  • Bosch B24IW50NSP | Installation Instructions - Page 96
    de la unidad 96 Nota: Se visualiza un diseño de panel de madera. Por más información respecto de diferentes estilos, consulte la guía de diseño (DESING GUIDE).
  • Bosch B24IW50NSP | Installation Instructions - Page 97
    Accesorios y herramientas necesarias 1. Accesorios que forman parte del volumen de entrega - Instrucciones para el montaje - Instrucciones de funcionamiento - Juego de instalación 2. Accesorios opcionales13. Basic Combination SideĆbyĆSide Sealing kit (combinación básico y sellado lado a lado) Para
  • Bosch B24IW50NSP | Installation Instructions - Page 98
    éstico deben estar firmemente sujetos a las paredes. q Controle que los muebles o adornos adyacentes no colisionen (ángulo de apertura de las puertas). 98 18" / 457 mm 24" / 610 mm 30" / 762 mm 36" / 914 mm 86" / 2185 mm 86" / 2185 mm 86" / 2185 mm 86" / 2185 mm 853/4" / 2180 mm 871/4" / 2215
  • Bosch B24IW50NSP | Installation Instructions - Page 99
    y las gavetas, antes de concluir con la instalación. De lo contrario pueden dañarse. q Controle si el electrodoméstico presenta daños de transporte. No instale el electrodoméstico si presenta daños visibles. En caso de dudas, consulte con su vendedor. 99
  • Bosch B24IW50NSP | Installation Instructions - Page 100
    5. Cambiando las bisagras d CUIDADO d ¡Antes de trabajar en las bisagras, quite los muelles! ¡Hay peligro de lesiones! Las bisagras de las puertas deben cambiarse de posición, según los requerimientos de la instalación. i Si no es necesario efectuar un cambio de los topes para la puerta,
  • Bosch B24IW50NSP | Installation Instructions - Page 101
    q Cambie de lado el ángulo de la bisagra. q Sujete las bisagras en el electrodoméstico. ¡Cambie las bisagras cruzadas! q Monte completamente las partes nuevas de la parrilla. q Sujete la puerta. q Cambie de lado las piezas de sujeción en la puerta. q Tensione el muelle de la bisagra. Ajuste el
  • Bosch B24IW50NSP | Installation Instructions - Page 102
    (609,6-647,7) q Sujete luego la caja de cobertura de la bisagra. q Sujete las placas de montaje cruzadas. 6. Preparación de la cavidad de instalación i Se necesitan dos grampas antivuelco para cada electrodoméstico o combinación de electrodomésticos (SideĆbyĆSide (Lado a lado)). q Determine los
  • Bosch B24IW50NSP | Installation Instructions - Page 103
    Aplicación con piso de cemento d CUIDADO d Utilice siempre gafas y otros dispositivos de protección cuando instala o trabaja con tarugos. ¡Peligro de lesiones! No recomendado par ser usado en material de mampostería liviana como bloques y ladrillos. No recomendado para ser usado en cemento
  • Bosch B24IW50NSP | Installation Instructions - Page 104
    q Monte la tubería de conexión a la válvula de cierre, según las instrucciones suministradas por el fabricante de la instalación generadora de hielo. q Instale la tubería de conexión. Observe siempre las medidas de separación indicadas, a fin de evitar daños en la tubería de conexión, cuando coloca
  • Bosch B24IW50NSP | Installation Instructions - Page 105
    10. Instalación SideĆbyĆSide (Lado a lado) i Si ha previsto un emplazamiento lado a lado, debe ahora unir ambos equipos. Consulte el manual del instalación por la información concerniente a la Instalación SideĆbyĆSide (Lado a lado). q Para proteger la hornacina, sujete los ángulos de protecci
  • Bosch B24IW50NSP | Installation Instructions - Page 106
    q Cuide de no dañar el cable de alimentación. Sujete un pedazo de hilo en el medio del cable, llevándolo hacia delante debajo del electrodoméstico. Cuando introduzca el electrodoméstico, tire el cable hacia delante. o bien Pegue el cable mediante cinta adhesiva en el suelo detrás del electrodomé
  • Bosch B24IW50NSP | Installation Instructions - Page 107
    la parte posterior del equipo. - Si utiliza una vigueta de madera como dispositivo antivuelco alternativo, según se describe en el punto 6 de este manual de instalación, rote el electrodoméstico totalmente hacia la vigueta de madera. q Atornille las placas de las eclisas de sujeción (superiores) al
  • Bosch B24IW50NSP | Installation Instructions - Page 108
    éstico, siga las instrucciones provistas por el fabricante conjuntamente con el kit de montaje del generador de hielo que se incluyen en este manual. d CUIDADO d Cuando conecte la tubería de agua, no la retuerza. De lo contrario existe el riesgo que seproduzcan pérdidas de agua. Utilice los
  • Bosch B24IW50NSP | Installation Instructions - Page 109
    16. Sujeción del panel de protección d CUIDADO d La altura máxima del panel de protección sobre el suelo es de 4". No obture las aberturas de ventilación en el base del panel. Existe riesgo de daños en el electrodoméstico. q Si hace falta, corte el panel de protección a la longitud necesaria.
  • Bosch B24IW50NSP | Installation Instructions - Page 110
    el trabajo, a fin de evitar daños. El peso total del frente del mueble, no debe exceder los valores siguientes: 18" 37 lbs/17 kg 24" 50 lbs/23 kg 30" 64 lbs/29 kg Los frentes de los muebles se sujetan a la puerta del electrodoméstico, mediante elementos o piezas de
  • Bosch B24IW50NSP | Installation Instructions - Page 111
    los muebles, se recomienda aplicar pesas en las gavetas de la puerta. Se recomienda: Electrodoméstico de 18" 22 lbs/10 kg Electrodoméstico de 24" 33 lbs/15 kg Electrodoméstico de 30" 44 lbs/20 kg 111
  • Bosch B24IW50NSP | Installation Instructions - Page 112
    20. Montaje del riel de ajuste en la puerta del mueble i El riel de ajuste es el elemento más importante para el ajuste del frente del mueble. q Desatornille el soporte de instalación de la puerta del electrodoméstico. i Los elementos auxiliares para el posicionamiento son necesarios para el
  • Bosch B24IW50NSP | Installation Instructions - Page 113
    21. Sujeción y alineación de la puerta del muble i Los pernos de doble rosca cumplen la función de ajustar la altura de la puerta del mueble. q Cuelgue la puerta de lo pernos de doble rosca. q Alinee la puerta mediante los pernos de doble rosca (destornillador Torx). q Marque una línea vertical. q
  • Bosch B24IW50NSP | Installation Instructions - Page 114
    22. Sujeción de la puerta del mueble i ¡Atornille ahora las manijas del mueble que ha quitado anteriormente! q Cuelgue la puerta con el riel de ajuste sobre los pernos de doble rosca. q Enrosque las tuercas ligeramente en los pernos de doble rosca. ¡No las ajuste! q Ajuste la puerta del mueble
  • Bosch B24IW50NSP | Installation Instructions - Page 115
    q Ajuste las tuercas en el riel de ajuste. Esto fijará el ajuste lateral de la puerta. q Atornille los soportes inferiores (correspondiente al juego de elementos auxiliares). ¡Practique orificios preparativos en la puerta del mueble! Los soportes inferiores ajustan la alineación lateral de la puerta
  • Bosch B24IW50NSP | Installation Instructions - Page 116
    puerta a la protección para los dedos. q Corte la protección para los dedos a la longitud requerida, mediante una regla de acero y un cuchillo. 24. Montaje de la protección para los dedos q Empuje la cubierta sobre el soporte y atornille firmemente. q Monte la protección para los dedos debajo de
  • Bosch B24IW50NSP | Installation Instructions - Page 117
    lada que fue sujetada la protección para los dedos. q Monte la cubierta para el conmutador de la luz. i La cubierta para los electrodomésticos de 24", 30" y 36" pueden atornillarse en la puerta. Únicamente en caso de instalación SideĆbyĆSide (Lado a lado): q Coloque los listones de cobertura en la
  • Bosch B24IW50NSP | Installation Instructions - Page 118
    Montaje individual únicamente: B A 26. Orientación del dispensador de hielo y agua (solamente para unidad de congelación con dispenĆ sador de hielo y agua) El dispensador de hielo y agua puede orientarse dentro de la escotadura de la puerta del mueble en cuanto a su profundidad. Con ello se permite
  • Bosch B24IW50NSP | Installation Instructions - Page 119
    27. Colocación del listón de cobertura (solamente para el armario de depósito para vinos) 28. Colocación del cuadro de cobertura y del depósito (solamente para unidades con dispensador de hielo y agua) Advertencia: Para puertas de mueble con un espesor de 3/4" / 19 mm: q Desplazar el marco de
  • Bosch B24IW50NSP | Installation Instructions - Page 120
    q Desplazar el listón de cobertura dentro del espacio comprendido entre la puerta del mueble y el vidrio. 29. Montaje del separador de aire Atornille el separador de aire a la puerta del mueble a fin de separar el aire de entrada y salida. q Cerrar la puerta lentamente. Controlar si el escape de
  • Bosch B24IW50NSP | Installation Instructions - Page 121
    31. Cambio del muelle de la puerta A fin de ajustar el muelle de la puerta. q Girar del tornillo de ajuste mediante un destornillador para ranura en cruz. I = aumenta la tensión del muelle. 0 = disminuye la tensión del muelle. 121
  • Bosch B24IW50NSP | Installation Instructions - Page 122
    122
  • Bosch B24IW50NSP | Installation Instructions - Page 123
  • Bosch B24IW50NSP | Installation Instructions - Page 124
    Robert Bosch Hausgeräte GmbH CarlĆWeryĆStraße 34 81739 München Germany www.boschĆhomeappliance.com Subject to modification. Sous réserve de modifications. Se reserva el derecho a efectuar modificaciones. 9000 222 918 (8611)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124

INSTALLATION INSTRUCTIONS
INSTRUCTIONS D'INSTALLATION
INSTRUCCIONES DE
INSTALACIÓN
Single
Door Models
Modèles à une porte
Modelos
de una puerta