Bosch B36CD50SNS Use and Care Manual - Page 24
Installing updates for the Home, Connect software
View all Bosch B36CD50SNS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
en-us Home Connect Connecting the refrigerator to the Home Connect app The appliance automatically connects to the app with set-up for the first time after a connection to the WLAN home network has been established (Wi-Fi). If the appliance does not automatically connect to the app, connect the appliance manually: 1. Press the menu button. The connect button lights up. The submenu display shows Cn. 2. Press the Y/X submenu button repeatedly until the submenu display shows PA and the settings display OF. 3. Press Y Settings button to connect the appliance to the app. The settings display shows an animation. As soon as the refrigerator and the app are connected, the settings display shows On. 4. Open the app and wait until the refrigerator is displayed. Press Add to confirm the connection between the app and the refrigerator. If the refrigerator is not automatically displayed, click on Add appliance in the app and follow the instructions. As soon as your refrigerator is displayed, add it with +. 5. Follow the instructions in the app until the process is complete. The submenu display shows PA and the settings display On. The refrigerator has been connected to the app. If the connection fails, check whether the mobile device is connected to the WLAN home network (Wi-Fi). Then try to establish the connection again. If the settings display shows Er, reset the Home Connect settings. Note: On resetting, all Home Connect settings are reset. Verifying signal strength You should verify the signal strength if no connection can be established. 1. Press the menu button. The connect button lights up. The submenu display shows Cn. 2. Press the Y/X submenu button repeatedly until the submenu display shows SI. The settings display shows a value between 0 (no reception) and 3 (full reception). The signal strength should be at least 2. If the signal strength is too weak, the connection may be interrupted. - Place the router and refrigerator closer together. - Check that screening walls do not interfere with the connection. - Alternatively, install a repeater to make the signal stronger. Reset Home Connect settings If there is a problem when trying to establish a connection, or if you would like to register the appliance on a different WLAN home network (Wi-Fi), the Home Connect settings can be reset: 1. Press the menu button. The connect button lights up. The submenu display shows Cn. 2. Press the Y/X submenu button repeatedly until submenu display shows rE and the settings display OF. 3. Press Y/X Settings button. The settings display shows an animation for 15 seconds. The display then shows OF settings. The Home Connect settings have been reset. Installing updates for the Home Connect software The refrigerator checks at regular intervals whether updates are available for the Home Connect software. If an update is available, the submenu display shows UP: ■ Confirm update in Home Connect app. Do not switch the refrigerator off during updates. The settings display shows an animation. The update is being installed. Note: All buttons are locked during installation. ■ If installation has been completed successfully, the settings display shows On. ■ If installation has not been completed successfully, the settings display shows Er. Start the update again at a later time. If installation could not be completed even after multiple attempts, notify customer service. Press any button to reset the display to the set temperature. 24
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104