Bosch BSG71370UC Use and Care Manual - Page 7
Changing the dust bag
UPC - 825225835844
View all Bosch BSG71370UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Changing the dust bag If the dust bag change indicator in the cover is completely yellow when the floor tool is lifted off the floor and the highest suction setting is selected, the dust bag must be replaced even if it should not be completely full yet. In this case it is essential to change the dust bag due to the type of material it contains. The nozzles, suction pipe and flexible hose should not be blocked, as this will also trigger the dust bag change indicator. Open the cover by moving the locking lever in the direction of the arrow. Seal and remove the MEGAfilt®SuperTEX dust bag by pulling on the tab as shown. 12 Place a new MEGAfilt®SuperTEX dust bag in the holder and close the dust bag compartment lid. Caution: The cover only closes when a MEGAfilt®SuperTEXdust bag has been inserted. Cleaning the motor protection filter The motor protection filter should be cleaned at regular intervals by tapping it or washing it out. Ⅲ Open the dust compartment cover. Ⅲ Remove the motor protection filter in the direction of the arrow. Ⅲ Empty the motor protection filter by tapping it. Ⅲ If the motor protection filter is very dirty, wash it out. Leave the filter to dry for at least 24 hours. Ⅲ After cleaning, insert the motor protection filter in the machine and close the dust compartment cover. 13