Bosch DVR-430-04A050 User Guide - Page 32
Viewing pictures
View all Bosch DVR-430-04A050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
32 en | Operating instructions Video Recorder 430/451 Series 5.4 5.4.1 5.4.2 5.4.3 Viewing pictures The unit has two monitor outputs, A and B. The way in which these monitors display pictures depends on how the system is configured. Monitor A Monitor A is the main monitor. It shows full-screen or quad multiscreen live, or playback camera pictures. Status messages, alarms, motion, and video loss warnings are also displayed on this monitor. When the menu system is activated, it is displayed on this monitor. Monitor A is the default monitor for keyboard and mouse commands. Changing the full-screen display on Monitor A To control the display on monitor A with mouse control: 1. Bring up the System Control Bar. 2. Click the Monitor A button. 3. From the pop-up menu, select the display for Monitor A - Select 1-4 for the corresponding Camera - Select the sequence key to sequence channels 1-4 Monitor B Monitor B displays full-screen or a sequence of live pictures. When an alarm or motion input is detected, the camera picture with the Alarm/Motion indicator can be displayed on monitor B. When multiple alarms or motion occur, camera pictures are sequenced on monitor B. Changing the display on Monitor B To control the display on monitor B: 1. Bring up the System Control Bar. 2. Click the Monitor B button. 3. From the pop up menu, select the display for Monitor B - Select 1-4 for the corresponding Camera - Select the sequence key to sequence channels 1-4 Viewing The drawing shows all possible views for monitor A. Single Quad 1 2 1 3 4 Figure 5.4 DVR supports single and quad screen viewing Multiscreen To view quad displays on monitor A: - Press the quad key. - A quad display of camera pictures appears on the active monitor. F.01U.168.054 | v2.0 | 2012.05 Installation and Operation manual Bosch Security Systems