Bosch DVR6E1082 Installation Instructions - Page 17

Divar | Installation Manual | Quick install EN | 2-5 >> RECORDING SETTINGS RECORDING SETTINGS DAY PERIOD WEEKEND REC DAY REC WEEKEND/NIGHT ENABLE ALARM INPUTS FOR ALARM INPUT RECORDING ENABLE MOTION FOR MOTION RECORDING APPROX. REC. DURATION 8:00 18:00 SAT AND SUN 1 IPS/CAM 2 IPS/CAM DAY/NIGHT 12.5 IPS/INPUT NIGHT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 5 IPS/CAM 036 HOURS >> DAY PERIOD • Fill in a start time and an end time to define the period during which the day profile is active. • The weekend/night profile is active for the rest of the 24-hour period. >> WEEKEND • When a day is defined as a weekend day, then the weekend/night profile is active that whole day. • Define the weekend as either Saturday and Sunday or just Sunday. • Select none if you wish the weekend to be the same as the other days of the week. >> REC DAY • Select the normal recording speed to be used for each of the activated cameras during the day profile. • The Images Per Second (IPS) rates available for PAL range from Never, 0, 1/10 (one image every 10 seconds), up to 25 IPS. • The Images Per Second (IPS) rates available for NTSC range from Never, 0, 1/10 (one image every 10 seconds), up to 30 IPS. • Set the recording speed to NEVER to not record a camera at all. No prealarm recording is done and the camera cannot be viewed over the network. >> REC WEEKEND/NIGHT • Select the normal recording speed to be used for each of the activated cameras during the weekend/night profile. • The Images Per Second (IPS) rates available for PAL range from Never, 0, 1/10 (one image every 10 seconds), up to 25 IPS. • The Images Per Second (IPS) rates available for NTSC range from Never, 0, 1/10 (one image every 10 seconds), up to 30 IPS. • Set the recording speed to NEVER to not record a camera at all. No prealarm recording is done and the camera cannot be viewed over the network. >> ENABLE ALARM INPUTS FOR • Select the profiles during which alarm inputs are enabled. • Choose day only, weekend/night only, both day and weekend/night or none. >> ALARM INPUT RECORDING • An activated input alarm can increase the recording speed of a camera. Select the recording speed to be used when an input is activated. • The camera with the number that corresponds to the alarm input number is recorded at the speed you set. >> ENABLE MOTION FOR • Select the profiles during which motion events are enabled Choose day, weekend/night, both day and weekend/night or none. • Press the camera keys to select or deselect the cameras for which motion should be enabled. A check mark means enabled. >> MOTION RECORDING • A camera can be recorded at an increased recording speed when motion is detected. Select the recording speed to be used for each of the cameras when motion is detected. Bosch Security Systems