Bosch HBL3460UC Installation Instructions - Page 3
Safety - parts
UPC - 825225843115
View all Bosch HBL3460UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Safety m Important Safety Instructions READ AND SAVE THESE INSTRUCTIONS Appliance Handling Safety Safety Codes and Standards Electric Safety WARNING: If the information in this manual is not followed exactly, fire or shock may result causing property damage or personal injury. WARNING: Do not repair or replace any part of the appliance unless specifically recommended in the manuals. Improper installation, service or maintenance can cause injury or property damage. Refer to this manual for guidance. All other servicing should be done by a qualified technician. Do not lift appliance by door handle. Remove the door for easier handling and installation. See instructions in Use and Care Manual. Unit is heavy and requires at least two people or proper equipment to move. Hidden surfaces may have sharp edges. Use caution when reaching behind or under appliance. This appliance complies with one or more of the following Standards: • UL 858, The Standard for the Safety of Household Electric Ranges • UL 923, The Standard for the Safety of Microwave Cooking Appliances • UL 507, The Standard for the Safety of Electric Fans • ANSI Z21.1, The American National Standard for Household Cooking Gas Appliances • CAN/CSA-C22.2 No. 113-M1984 Fans and Ventilators • CAN/CSA-C22.2 No. 61-M89 Household Cooking Ranges It is the responsibility of the owner and the installer to determine if additional requirements and/or standards apply to specific installations. Before you plug in an electrical cord, be sure all controls are in the OFF position. If required by the National Electrical Code (or Canadian Electrical Code), this appliance must be installed on a separate branch circuit. Installer - show the owner the location of the circuit breaker or fuse. Mark it for easy reference. Important - Save these instructions for the local electrical inspector's use. Before installing, turn power OFF at the service panel. Lock service panel to prevent power from being turned ON accidentally. Refer to data plate for more information. See "Data Plate" under "Service" for data plate location. English 1