Bosch HBL8444LUC Use and Care Manual - Page 32
Maintenance
View all Bosch HBL8444LUC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
en-us Cleaning and maintenance a The oven door locks. blinks on the display and then remains lit until the oven has cooled down after self clean is finished. a "SELF CLEAN" lights up on the display. a The timer starts to count down. a When self clean is finished, the display shows 0:00. The oven remains locked until it has cooled down sufficiently. "COOLING DOWN" is displayed. a When the oven has cooled down the door unlocks and "SELF CLEAN FINISHED" is displayed. 5. Press Oven Clear/Off. 6. Wipe the remaining ash from the oven with a moist cloth. Canceling self clean - 800 Series 1. Press Oven Clear/Off. a "COOLING DOWN" is displayed. a The door remains locked. a When the oven has cooled down the door unlocks and "SELF CLEAN FINISHED" is displayed. 2. Press Oven Clear/Off. 3. Wipe the remaining ash from the oven with a moist cloth. Starting self clean - Benchmark® Series Requirements ¡ All heating modes or timers are canceled. ¡ You have carried out the steps for preparing the oven for self clean. → "Preparing self clean", Page 31 1. For double ovens: Select the oven cavity you want to clean. 2. Press More Modes. a "Self Clean" lights up on the display. a The default self clean time "3:00" blinks on the timer display. 3. You can set a self clean time between 2 and 4 hours and set a delayed start for running self clean. Press the relevant soft key under the display. Tip: Use a longer setting for a heavily soiled oven. You can set a self clean timer for 2, 3 or 4 hours. 4. Press Enter. a The oven door locks. a "SELF CLEAN" lights up on the display. a The timer starts to count down. a When self clean is finished, the display shows 0:00. The oven remains locked until it has cooled down sufficiently. "COOLING DOWN" is displayed. a When the oven has cooled down the door unlocks and "SELF CLEAN FINISHED" is displayed. 5. Press Clear/Off. 6. Wipe the remaining ash from the oven with a moist cloth. Canceling self clean - Benchmark® Series 1. Press Clear/Off. a "COOLING DOWN" is displayed. a The door remains locked. a When the oven has cooled down the door unlocks and "SELF CLEAN FINISHED" is displayed. 2. Press Clear/Off. 3. Wipe the remaining ash from the oven with a moist cloth. 12.3 Maintenance Replacing an oven light bulb When the oven light fails you can replace the light bulbs. WARNING Light socket is live when door is open if main power supply is not turned off. ▶ Turn off main power supply at the service panel before changing the light bulbs. WARNING Make sure the appliance and lights are cool and power to the appliance has been turned off before replacing the light bulb(s). Failure to do so could result in electrical shock or burns. ▶ The lenses must be in place when using the appliance. ▶ The lenses serve to protect the light bulb from breaking. ▶ The lenses are made of glass. Handle carefully to avoid breaking. Broken glass can cause an injury. Light bulb specifications Refer to this chart for information on the light bulb you have to use for your oven model. Bulb description Bulb image 25 Watt, halogen bulb, G9 base, 120 Volts Replacing a G9 base oven light with round glass cover Note: The graphics are representative. Your appliance may have different graphic appearances. Requirements ¡ Refer to the oven light bulb chart for the oven light spec- ification of your oven. ¡ Follow the safety instructions on replacing a light bulb. → Page 32 1. Turn off the power to the oven at the main power supply (fuse or breaker box). 2. Remove the oven racks. 32