Bosch NEM9422UC Installation Instructions - Page 4

Parts included Preparation Countertop requirements 1. Hold down brackets 2. Clamping screws (4) 3. Sheet metal screws (4) Flat Area Flat Area Cabinet requirements 4 Setback Distance Flat Area After preparing cutout, remove shavings as they can affect the function of electrical components. d WARNING: To reduce the risk of ignition combustible materials surround the installed cooktop are not permitted. Solid surface countertops often require special installations. For example, heat reflective tape and rounded corners may be necessary. Contact the countertop manufacturer for instructions specific to your countertop. The distance from the top of the cooktop to the bottom of cabinets above can be reduced to 24" when the bottom of the wood or metal cabinet is protected by not less than 1/4" (6.35mm) no. 28 MSG sheet steel, 0.015" (0.4 mm) thick stainless steel, 0.024" (0.6 mm) aluminum) or 0.020" (0.5 mm) thick copper.