Bosch NGP745UC Installation Manual - Page 5
Installation - dimensions
View all Bosch NGP745UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Installation Before You Begin Tools and Parts Needed Parts Included General Information 1) Phillips Head Screwdriver 2) Drill with 1/4" (6.35mm) bit 3) Tape Measure 1) Foam tape 2) Hold down brackets (4) 3) Screws, #10-32 x 2 1/2" (63.8mm) (4) 4) Sheet Metal Screws, #8 x 3/8" (9.5mm) (4) 5) Washers (4) 6) Rubber Grate Foot (1 extra foot is included for future use if required) 7) Burner Grates 30" models: (2) 36" models (3) 8) Burner Caps 30" models: (4) 36" models: (5) 9) Regulator If parts are missing or damaged, call the number or write to the address listed inside the cover. Overall Dimensions Table 1: Overall Dimensions Width (Side to Side) Depth (Front to Back) Height (Top to Bottom) 30" Models 31" (787.4 mm) 36" Models 37" (939.8 mm) 21" (533.4 mm) 21" (533.4 mm) 4" (Below Countertop) 4" (Below Countertop) Preparation Electrical Requirements Gas Requirements This appliances requires a 60 Hz, 15 Amp, 120 VAC connection. Plan the installation so that the power connection is accessible from the front of the cabinet. Supply Pressure: English 3