Bosch NIT8053UC Installation Instructions - Page 8

Secure cooktop to countertop Electrical connection NOTE: 8 The cooktop should be secured to the countertop using the holdĆdown brackets provided. Prior to inserting cooktop into cutout, turn cooktop upside down and attach brackets to the burner box using the washers and screws. Place cooktop into cutout. Insert clamping screw into the bracket and secure cooktop to countertop. Use a wood block to protect fragile countertop materials. CAUTION: Before installing, turn OFF at the service panel. Lock service panel to prevent power from being turned ON accidentally. The branch-circuit breakers ampacity, the wire sizes and the connections must be conform to the requeriments of the National Electrical Code or Canadian Electrical Code and all local codes and ordinances. Frame grounded by connection of grounding lead to neutral lead. If used in a mobile home or if local codes do not permit grounding through neutral, open connection and use grounding lead to ground unit in accordance with local codes. Connect neutral lead to branch-circuit neutral conductor in usual manner. Attach flexible conduit to the junction box. CAUTION: To reduce the risk of electric shock and fire, do not use a flexible power-supply cord. Connect the cooktop lead wires to the junction box supply wires in proper phase: black (L1) to black red (L2) to red green wire to ground If the cooktop is installed and connected as specified above, it will be completely grounded in compliance with the National Electrical Code.