Bosch NIT8053UC Use & Care Manual - Page 19
Service
UPC - 825225853916
View all Bosch NIT8053UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
āService Troubleshooting The cooktop is not working E is flashing on the element display E flashes on all the element displays and a signal sounds The cooktop turns off by itself Problems often have a simple explanation. Before calling customer service, please check the following: Check to see if there is a problem with the circuit breaker for the appliance. See if there is a power outage. The touch key panel is heavily soiled, food has boiled over, or there is something lying on the touch key. Wipe the touch key thoroughly or remove the object. Press the corresponding touch key. The flashing should stop. The main switch has been activated continuously for more than 5 seconds. Wipe up any soil on the touch keys. Remove any objects that are resting on the touch keys. Reset the cooktop. The power key was touched unintentionally. Press power key again. Reset the cooktop. The display flashes (there is no power) when you place a saucepan on an induction element The powerboost function display flashes and then switches off Repairs d Check whether the saucepan is electromagnetic (attracts a magnet). Check whether the diameter of the saucepan is large enough. Allow the saucepan to cool down in the event that it has become too hot when used. If the display still does not light up when you switch the element off and on again, disconnect the appliance at the circuit breaker. Wait 20 seconds and then reconnect it. The powerboost function operates the element with the most possible power. During long cooking times, it is possible that the function will switch the element off to protect the cooktop from overheating. You can continue to use the cooktop if the display is not flashing. Repairs should only be done by a trained service technician. WARNING If your appliance is repaired improperly, you could be at considerable risk. 19