Bosch SGE53B55UC Use and Care Manual - Page 9
Preventing, material damage, Environmental, protection and, energy-saving
View all Bosch SGE53B55UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Preventing material damage 2 Preventing material damage Preventing material damage 2.1 Safe use Follow the instructions when using the appliance. NOTICE: Unsuitable cleaning products may damage the appliance. ▶ Do not use a steam cleaner. ▶ So as not to scratch the finish on the appliance, do not use sponges with a rough surface or abrasive cleaning agents. ▶ To prevent corrosion, do not use cellulose sponge cloths on dishwashers with a stainless steel front or rinse the cloths thoroughly several times before using them for the first time. Escaping water vapor can damage cabinetry. ▶ When the program ends, let the appliance cool down a bit before opening the door. Special salt for dishwashers can damage the tub due to corrosion. ▶ To make sure that any special salt that escapes is washed out of the tub, add the special salt to the dispenser for special salt immediately before the program starts. Detergent may damage the water softening system. ▶ Only fill the dispenser of the water softening system with special dishwasher salt. Harsh chemicals such as bleachbased products can damage your dishwasher. ▶ Do not use harsh chemicals such as bleach-based products to clean your dishwasher. Preventing material damage en-us Protect your appliance from the elements. ▶ Protect against freezing to avoid possible damage to the fill valve. Damage caused by freezing is not covered by the warranty. Environmental protection and energy-saving 3 Environmental protection and energy-saving Environmental protection and energy-saving 3.1 Saving energy If you follow these instructions, your appliance will use less power and water. Use the Normal program. a The Normal program is energy- efficient and environmentally friendly. → "Dishwasher Cycles", Page 14 3.2 AquaSensor The AquaSensor is an optical measuring device (light barrier) which measures the turbidity of the washing water. You can save water with the AquaSensor. The operation of the AquaSensor depends on the selected cycle. If the soiling level is high, the washing water is drained off and replaced with fresh water. If the soiling level is lower, the washing water is used in the next wash cycle, so reducing water consumption by 3-6 liters. In the Auto cycles the temperature and run time are additionally adjusted to the level of soiling. 9