Bosch SGE53B56UC Use and Care Manual - Page 40
Issue, Cause and troubleshooting
View all Bosch SGE53B56UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
en-us Troubleshooting Issue A different error code appears in the display window. E:01-00 to E:90-10 Cause and troubleshooting There is a technical issue. 1. Press . 2. Pull out the power cord plug of the appliance or switch off the breaker. 3. Wait at least 2 minutes. 4. Insert the power cord plug of the appliance in a power outlet or switch on the breaker. 5. Switch the appliance on. 6. If the problem occurs again: ‒ Press . ‒ Turn off the water faucet. ‒ Pull out the power cord plug. ‒ Contact customer service → Page 50 and give the error code. Dishware is not dry. No rinse aid used or dosage set too low. 1. Add Rinse aid → Page 21. 2. Set the amount of rinse aid to be dispensed. → "Setting the amount of rinse aid", Page 22 Cycle or cycle option has no drying phase, or drying phase is too short. ▶ Select a wash cycle with drying. → Page 14 Some option buttons decrease the drying result. Water collects in recesses of dishware or silverware. ▶ Position dishware at an angle where possible. The combined detergent used has a poor drying performance. 1. Use rinse aid to improve drying performance. 2. Use a different combined detergent with a bet- ter drying performance. Extra Dry not activated to improve drying performance. ▶ Activate Extra Dry. 40