Bosch SGE53C56UC Use and Care Manuals - Page 49
Terminating the wash cycle,
View all Bosch SGE53C56UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Troubleshooting en-us Issue Cause and troubleshooting Appliance does not The breaker has tripped. start. ▶ Check the relevant breaker. Power cord is not inserted. 1. Check whether the power outlet is working. 2. Check whether the power cord plug is properly inserted in the power outlet and on the rear of the appliance. Appliance door is not closed properly. ▶ Close the appliance door. Wash cycle starts You did not wait until the cycle ended. up automatically. ▶ → "Terminating the wash cycle", Page 29 Appliance stops dur- Appliance door is not closed properly. ing the cycle or cuts ▶ Close the appliance door. out. Power and/or water supply has been interrupted. 1. Check the power supply. 2. Check the water supply. Upper rack is pressing against inner door and preventing appliance door from being closed securely. ▶ Check whether the rear panel of the appliance is being pressed in by a power outlet or a hose holder that has not been removed. ▶ Arrange the dishware so that no parts project beyond the rack and prevent the appliance door from closing properly. Appliance door can- Door lock has been activated. not be closed. ▶ Close the appliance door with greater force. Door cannot be closed due to installation method. ▶ Check whether the appliance has been in- stalled properly. When closed, the appliance door, its decor or attached parts should not knock against adjacent cabinets or the worktop. Lid on the detergent Detergent dispenser or lid are blocked by sticky dispenser cannot be detergent residue. closed. ▶ Remove detergent residue. Filling valves mak- Caused by the domestic installation. No fault ing knocking noises. present in the appliance. Does not affect function- ing of the appliance. ▶ Can only be remedied in the home installation. 49