Bosch SGE53X52UC Instruction manual - Page 13

Water softening, system / special salt

Get Bosch SGE53X52UC PDF manuals and user guides View all Bosch SGE53X52UC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Water softening system / special salt en-us + Water softening system / special salt To ensure good rinsing results, the Watersofteningsystem/specialsalt dishwasher requires soft water, i.e. water which is low in lime, otherwise limescale will be deposited on the utensils and interior container. Tap water above 7° dH (1.2 mmol/l) must be softened. The water is softened with special salt (regeneration salt) in the water softening system of the dishwasher. The setting and therefore the required amount of salt depends on the degree of hardness of your tap water (see following water hardness table). Water hardness table :DWHUKDUG +DUGQHVV QHVVYDOXH UDQJH *UDLQVJDOORQ JSJ Ȣ VRIW Ȣ VRIW Ȣ PHGLXP Ȣ PHGLXP Ȣ PHGLXP Ȣ KDUG Ȣ KDUG Ȣ KDUG PPROO :DWHU VRIWHQHU VHWWLQJ Adjusting the water softening system The amount of salt dispensed can be set from •:‹‹ to •:‹ˆ. Salt is not required at the set value •:‹‹. Set the softening system as follows: 1. Ask your local water utility company for the water hardness value of your tap water or use test strip. 2. Required setting can be found in the water hardness table. 3. Press On/Off button (. 4. Hold down function key # and press Start button P until the display 8 indicates •:‹x (x can be any number). 5. Release both buttons. The indicator of function key # flashes and the display 8 indicates Press function key 3 to select the desired setting. 6. Press Start button P to save the setting. The chosen setting has now been stored. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
Water softening system / special salt
en-us
13
+
Water softening
system / special salt
W
ater
softeni
ng
system
/
speci
al
sal
t
To ensure good rinsing results, the
dishwasher requires soft water, i.e.
water which is low in lime, otherwise
limescale will be deposited on the
utensils and interior container. Tap
water above 7° dH (1.2 mmol/l)
must be softened. The water
is softened with special salt
(regeneration salt) in the water
softening system of the dishwasher.
The setting and therefore the
required amount of salt depends on
the degree of hardness of your tap
water (see following water hardness
table).
Water hardness table
Adjusting the water
softening system
The amount of salt dispensed can be
set from
•
:
‹‹
to
•
:
‹ˆ
. Salt is not
required at the set value
•
:
‹‹
.
Set the softening system as follows:
1.
Ask your local water utility
company for the water hardness
value of your tap water or use test
strip.
2.
Required setting can be found in
the water hardness table.
3.
Press
On/Off
button
(
.
4.
Hold down function key
#
and
press
Start
button
P
until the
display
8
indicates
•
:
‹
x (x can
be any number).
5.
Release both buttons.
The indicator of function key
#
flashes and the display
8
indicates
•
:
‹‹
. Press function key
3
to select the desired setting.
6.
Press
Start
button
P
to save
the setting.
The chosen setting has now been
stored.