Bosch SGE78C55UC Use and Care Manuals - Page 44
Cleaning filters, Setting the amount of rinse aid,
View all Bosch SGE78C55UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
en-us Troubleshooting Issue E:61-03 lights up alternately. Water is not draining. Cause and troubleshooting Not an appliance error. High loop is missing and/ or debris flushed back into drain hose and blocked it. ▶ Be sure there is a high loop in the drain hose and that no debris has flushed back into the hose. E:90-01 lights up alternately. Power voltage is too low. There is no problem with the appliance. 1. Call an electrician. 2. Have the power voltage and electrical installation checked by an electrician. E:92-40 lights up al- Filters are soiled or blocked. ternately. ▶ Clean the filters. → "Cleaning filters", Page 40 A different error code appears in the display window. E:01-00 to E:90-10 Dishware is not dry. There is a technical issue. 1. Press . 2. Pull out the power cord plug of the appliance or switch off the breaker. 3. Wait at least 2 minutes. 4. Insert the power cord plug of the appliance in a power outlet or switch on the breaker. 5. Switch the appliance on. 6. If the problem occurs again: ‒ Press . ‒ Turn off the water faucet. ‒ Pull out the power cord plug. ‒ Contact customer service → Page 56 and give the error code. No rinse aid used or dosage set too low. 1. Add Rinse aid → Page 24. 2. Set the amount of rinse aid to be dispensed. → "Setting the amount of rinse aid", Page 25 44