Bosch SHE3AEE5N Use and Care Manuals - Page 21

To be able to use Home Connect®, you must first set up the connection to the WLAN home network (Wi-Fi 1) and to the Home Connect® app. The Home Connect® app guides you through the entire registration process. Follow the instructions in the Home Connect® app to implement the settings. Tips ¡ Consult the Home Connect® documents supplied. ¡ Follow the instructions in the Home Connect® app as well. Note: Also note the safety information in this instruction manual and ensure that it is also observed when operating the appliance using the Home Connect® app. 14.1 Home Connect® quick start Connect your appliance to a mobile device quickly and easily. Setting up the Home Connect® app 1. Install the Home Connect® app on your mobile device. 2. Start the Home Connect® app and set up access for Home Connect®. The Home Connect® app guides you through the entire registration process. Setting up Home Connect® Requirements ¡ The Home Connect® app is installed on your mobile device. ¡ The appliance receives signals from the WLAN home network (Wi-Fi) at its installation location. ¡ The appliance door is closed. 1. Open the Home Connect® app and scan the following QR code. 2. Follow the instructions in the Home Connect® app. 14.2 Home Connect® settings Adapt Home Connect® to your needs. You can find the Home Connect® settings in the basic settings for your appliance. Which settings the display shows will depend on whether Home Connect® has been set up and whether the appliance is connected to your home network. 1 Wi-Fi is a registered trade mark of the Wi-Fi Alliance. Home Connect® en-us 14.3 Remote Start You can use the Home Connect® app to start the appliance with your mobile device. Note: You can change settings using the Home Connect® app. Activating Remote Start Requirements ¡ The appliance is connected to your WLAN home network. ¡ The appliance is connected to the Home Connect® app. ¡ A program is selected. ▶ Press . If you open the appliance door, the function is automatically deactivated. a button lights up. Tip: To deactivate the function, press . Note The following settings are possible using the Home Connect® app: ¡ Deactivate the function permanently. ¡ Select the function using the button. This setting is the default preset at the factory. ¡ Activate the function permanently. With this setting pressing button is not necessary. 14.4 Remote Diagnostics The Customer Service can access your appliance via Remote Diagnostics if you ask them to do so, if your appliance is connected to the Home Connect® server and if Remote Diagnostics is available in the country where you are using the appliance. Tip: Further information and details about the availability of Remote Diagnostics in your country can be found in the Service/Support section of your local website: www.homeconnect.com. 14.5 Software update You can use this function to update the software of your appliance, e.g. for optimization, troubleshooting or safetyrelevant updates. The Home Connect® app informs you about available software updates. 14.6 Data Protection Please see the information on data protection. The first time your appliance is registered on a home network connected to the Internet, your appliance will transmit the following types of data to the Home Connect® server (initial registration): ¡ Unique appliance identification (consisting of appliance codes as well as the MAC address of the installed Wi-Fi communication module). 21