Bosch SHEM3AY52N Use and Care Manual - Page 33

Drain pump

Page 33 highlights

Drain pump Large food remnants in the rinsing water not retained by the filters may block the waste water pump. In this case: ■ Disconnect the appliance from the power supply. ■ Remove the filters. ~ "Filters" on page 31 ■ Scoop out standing water - use a sponge if necessary. ■ Using a spoon, pry off the pump cover until it clicks, then grip the cover and pull upward until it resists and then pull forward. Care and Maintenance en-us ■ Place cover in the original position, press down and engage. ■ Reinstall filters. Note: The drain pump will not work properly if the drain pump cover is not snapped in completely until it clicks.    &OLFN ■ Check inner compartment and remove any foreign objects. 9 WARNING Use caution when removing parts for cleaning as some debris may be sharp. 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90

Care and Maintenance
en-us
33
Drain pump
Large food remnants in the rinsing
water not retained by the filters may
block the waste water pump. In this
case:
Disconnect the appliance from the
power supply.
Remove the filters.
~
"Filters"
on page 31
Scoop out standing water - use a
sponge if necessary.
Using a spoon, pry off the pump
cover until it clicks, then grip the
cover and pull upward until it
resists and then pull forward.
Check inner compartment and
remove any foreign objects.
9
WARNING
Use caution when removing
parts for cleaning as some
debris may be sharp.
Place cover in the original
position, press down and engage.
Reinstall filters.
Note:
The drain pump will not work
properly if the drain pump cover is
not snapped in completely until it
clicks.