Bosch SHEM3AY56N Installation Instructions - Page 12
Attaching Water Inlet and Drain Hose
View all Bosch SHEM3AY56N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Attaching Water Inlet and Drain Hose 4 • Carefully flip the unit over. Remove the toe panel from the front of the unit and retain for attachment to the front at a later time. Loosen the leg levelers slightly. 5 • Attach elbow joint to dishwasher as shown. Do not overtighten. • Attach hot water line to elbow. Use two wrenches to tighten to avoid putting stress on the water inlet valve. NOTICE Avoid cross-threading! It will cause leaks. After attaching hose, temporarily hook up the water supply then turn on water to check for leaks. 12
12
•
Carefully flip the unit over. Remove the toe panel from the front of the
unit and retain for attachment to the front at a later time. Loosen the leg
levelers slightly.
Attaching Water Inlet and Drain Hose
•
Attach elbow joint to dishwasher as shown. Do not overtighten.
•
Attach hot water line to elbow. Use two wrenches to tighten to avoid
putting stress on the water inlet valve.
Avoid cross-threading! It will cause leaks. After attaching hose, temporarily
hook up the water supply then turn on water to check for leaks.
NOTICE
4
5