Bosch SHP7PT55UC Instructions for Use - Page 19

Interrupt a cycle, Delay Start, Cycle Completion Signal, Intensive Drying, Auto Power Off - dishwasher 02

Get Bosch SHP7PT55UC PDF manuals and user guides View all Bosch SHP7PT55UC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Interrupt a cycle 1 Press the [On/Off] button to turn the unit off. 2 To resume the cycle, press the [On/Off] button again. Delay Start You can delay the start of the cycle in one hour increments up to 24 hours. To set delay start: 1 Press the [On/Off] button. Select a cycle. 2 Press the [Delay] button until the displayed time corresponds with your requirements and press [Start] to activate delay start. h:01 = 1 hour delay h:24 = 24 hour delay To cancel delay start: 1 Press the [Delay] button until "h:00" is indicated on the digital display. 2 Press [Start] to save setting. Cycle Completion Signal 1 Open the door and press the [On/Off] button. 2 Hold down the "A" button (see page 17) and press [Start] until the display indicates "d:00". Release both buttons. 3 Press the "A" button until the display shows "b:02". 4 Press the "C" button to increase or decrease the tone "b:00" = OFF and "b:03" = LOUDEST and press [Start] to save setting and close the door. Intensive Drying The final rinse uses a higher temperature which improves the drying results. The running time may increase slightly. To turn intensive drying on: 1 Press the [On/Off] button. 2 Hold down the "A" button and press [Start] until the display indi- cates "d:00". Release both buttons 3 Press the "A" button until the display shows "d:00". 4 Press the "C" button to turn intensive drying on or off. "d:01" = ON and "d:00" = OFF and press [Start] to save setting. Auto Power Off To save energy, the dishwasher is turned off 1 minute after the wash cycle ends. Auto Power Off can be adjusted from P:00 to P:02. To change the factory setting (P:01): 1 Press the [On/Off] button. 2 Hold down the "A" button and press [Start] until the display indi- cates "d:00". Release both buttons. 3 Press the "A" button until the display indicates "P:01". 4 Press the "C" button until the display corresponds with your require- ments. P:00 = dishwasher does not turn off automatically P:01 = dishwasher turns off automatically after 1 minute P:02 = dishwasher turns off automatically after 120 minutes (2 hours) 5 Press [Start] to save the setting. 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
18
Interrupt a cycle
1
Press the
[On/Off]
button to turn the unit off.
2
To resume the cycle, press the
[On/Off]
button again.
Delay Start
You can delay the start of the cycle in one hour increments up to 24 hours.
To set delay start:
1
Press the
[On/Off]
button. Select a cycle.
2
Press the
[Delay]
button until the displayed time corresponds with
your requirements and press
[Start]
to activate delay start.
h:01
= 1 hour delay
h:24
= 24 hour delay
To cancel delay start:
1
Press the
[Delay]
button until “
h:00
” is indicated on the digital display.
2
Press
[Start]
to save setting.
Cycle Completion Signal
1
Open the door and press the
[On/Off]
button.
2
Hold down the “
A
” button (see page 17) and press
[Start]
until the
display indicates “
d:00
”. Release both buttons.
3
Press the “
A
” button until the display shows “
b:02
”.
4
Press the “
C
” button to increase or decrease the tone “
b:00
” = OFF and
“
b:03
” = LOUDEST
and press
[Start]
to save setting and close the door.
Intensive Drying
The final rinse uses a higher temperature which improves the drying
results. The running time may increase slightly.
To turn intensive drying on:
1
Press the
[On/Off]
button.
2
Hold down the “
A
” button and press
[Start]
until the display indi-
cates “
d:00
”. Release both buttons
3
Press the “
A
” button until the display shows “
d:00
”.
4
Press the “
C
” button to turn intensive drying on or off. “
d:01
” = ON
and “
d:00
” = OFF
and press
[Start]
to save setting.
Auto Power Off
To save energy, the dishwasher is turned off 1 minute after the wash
cycle ends. Auto Power Off can be adjusted from P:00 to P:02.
To change the factory setting (P:01):
1
Press the
[On/Off]
button.
2
Hold down the
“A”
button and press
[Start]
until the display indi-
cates
“d:00”
. Release both buttons.
3
Press the
“A”
button until the display indicates
“P:01”
.
4
Press the
“C”
button until the display corresponds with your require-
ments.
P:00
= dishwasher does not turn off automatically
P:01
= dishwasher turns off automatically after 1 minute
P:02
= dishwasher turns off automatically after 120 minutes (2 hours)
5
Press
[Start]
to save the setting
.