Bosch SHP9PCM5N Use and Care Manuals - Page 21

Third rack Basic Operation en-us 13.4 Setting options You can set options to complete the chosen wash program. Note: The available options depend on which program is selected. ▶ Press the button for the relevant option. a The option is set and the option button flashes. 13.5 Setting the time delay You can delay the start of the wash cycle via the Home Connect® app. ▶ Open the Home Connect® app and select the appliance. In the settings, you can use the time delay function to delay the start of the wash cycle. Basic Operation 13 Basic Operation Basic Operation 13.1 Protection against unintentional operation Your dishwasher has a built in feature to help prevent unintentional operation, e.g. by children. After starting the appliance, the door has to be closed within 4 seconds, otherwise the operation will be paused. If this occurs, follow the steps below to restart your dishwasher. 1. For top button controls: Press and close the door. 2. For front button controls: Close the door and press . a The wash cycle will resume. Notes ¡ Unintentional operation is activated when: - Pressing Start to begin a wash cycle - Setting Delay time and pressing Start - Opening the door while Delay time is active - Opening the door during a wash cycle. ¡ This feature cannot be deactivated. 13.2 Switching on the appliance ▶ Touch with a short 1 second touch. The cycle last selected and the option last selected will be set by default. The buttons on the appliance are touch sensitive and only require a quick, gentle touch. If you do not perform any actions on the appliance for 10 minutes, it will automatically switch off. 13.3 Setting a cycle To adjust the wash cycle to the soiling level of the dishware, select a suitable program. ▶ Press the right cycle button. a The cycle is set and the cycle button flashes. a The remaining run time of the cycle appears on the display. 13.6 Starting the wash cycle ▶ Press . a The wash cycle has ended when the display shows "00h:00m". Notes ¡ If you want to add more dishware while the appliance is running, do not use the collecting tray as a handle for the upper rack. You might touch the partially dissolved tablet. ¡ You can only change a cycle in progress if you can cancel it first. → "Terminating the wash cycle", Page 21 ¡ To save energy, the appliance switches off automatically 10 minutes after the end of the wash cycle. If you open the appliance door immediately after the wash cycle has ended, the appliance will switch off after 4 seconds. 13.7 Interrupting the wash cycle 1. Press On/Off. The program is saved and the appliance switches off. 2. Press On/Off. 3. Press to resume the wash cycle. 13.8 Terminating the wash cycle To end a cycle early or to switch from one that has already started, you will need to cancel it first. ▶ Press for approx. 4 seconds. a All displays light up. a As soon as the displays are off, the display shows "00h:01m" and the residual water is pumped out. a The cycle is cancelled and ends after approx. 1 minute. 21