Bosch SHPM65Z55N Installation Instruction - Page 25
Drain Connection
View all Bosch SHPM65Z55N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
19 • Connect the dishwasher water supply line to the water shut off valve. If one isn't already in the supply line, install one (not provided). • You will need to use an approved dishwasher water supply line with the correct fittings for this connection. • After all connections are made, turn on the hot water and check for leaks. Drain Connection IMPORTANT NOTES about your drain connection: • If local ordinance require an air gap, install it according to the manufacturer's instructions. • If the dishwasher drain hose is to be connected to a disposer dishwasher drain connection, remove the plug from the disposer's dishwasher drain connection. • The dishwasher drain hose must have one place along its length that is securely attached 33″ (84 cm) above the floor. • The drain hose length can be extended if necessary. Use kit #SGZ1010UC. The maximum length of the drain hose, including the hose leading to the air gap, is 150″ (380 cm). 25