Bosch SHX4AP02UC Use and Care Manual - Page 10

5 Rack Accessories Extra Tall Item Sprinkler If an item is too tall to be placed into the bottom rack even with the top rack in the raised position, remove the empty top rack by pulling it out of the dishwasher until it stops. Pull the front of the rack upward and outward until the rollers are completely free of the roller guides. Set the top rack aside. Push the roller guides back into the dishwasher. Insert the Extra Tall Item Sprinkler into the top rack spray outlet and turn the sprinkler clockwise to lock it into position. Load the dishwasher lower rack as shown below. It can accommodate items up to 22" tall. • Retrieve the top rack • Tilt the rack upwards and position the top rack rollers onto the roller guides. • Continue pushing the top rack until the rollers are on the guide. • Push the rack into the dishwasher all the way. Flip Tines Do not block vent The racks on select models consist of tines that you can fold down or raise depending on what you have to load in the rack. To fold down: • Grasp the tine. • Release from notch. • Push downwards. Manual Rack Height Adjustment NOTICE To avoid dishwasher damage, do not reinstall the top rack without removing the extra tall item sprinkler. NOTE: Keep the vent on the tub's right side clear by placing tall items such as plastic cutting boards and tall baking sheets on the bottom rack's left side,or center. To remove the sprinkler and return the dishwasher to its normal condition: • Turn the sprinkler counterclockwise and remove it. 10 Remove the empty rack by pulling it out of the dishwasher to the point that it can be lifted upward, as shown above. Pull the rack outward and up until the rollers are completely free of the roller guides.