Bosch SPE53B55UC Use and Care Manual 1 - Page 26

Deactivating

Get Bosch SPE53B55UC PDF manuals and user guides View all Bosch SPE53B55UC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

en-us Basic Operation 12.5 Setting the electronic delay time You can delay the start of the wash cycle by up to 24 hours. 1. Press . a "h:01" appears on the display. 2. Use to set the required start time for the wash cycle. 3. Press . a This activates the electronic de- lay time. Tip: To deactivate the electronic delay time, press repeatedly until "h:00" appears on the display. 12.6 Starting the wash cycle ▶ Press . a The wash cycle has ended when the display shows "0h:00m". Notes ¡ If you want to add more dish- ware while the appliance is running, do not use the collecting tray as a handle for the upper rack. You might touch the partially dissolved tablet. ¡ You can only change a cycle in progress if you can cancel it first. → "Terminating the wash cycle", Page 26 ¡ To save energy, the appliance switches off automatically 10 minutes after the end of the wash cycle. If you open the appliance door immediately after the wash cycle has ended, the appliance will switch off after 4 seconds. 12.7 Activating the button lock The button lock prevents the appliance from being operated accidentally or incorrectly while running. ▶ Press onds. for approx. 3 sec- a The button lock is activated and will be automatically deactivated at the end of the cycle. a flashes on the display when the appliance is running. a The button lock remains acti- vated with a power failure. 12.8 Deactivating the button lock ▶ Press onds. for approx. 3 sec- 12.9 Interrupting the wash cycle 1. Press On/Off. The program is saved and the appliance switches off. 2. Press On/Off. 3. Press cycle. to resume the wash 12.10 Terminating the wash cycle To end a cycle early or to switch from one that has already started, you will need to cancel it first. ▶ Press for approx. 4 seconds. a All displays light up. a As soon as the displays are off, the display shows "0h:01m" and the residual water is pumped out. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
en-us
Basic Operation
26
12.5
Setting the electronic
delay time
You can delay the start of the
wash cycle by up to 24 hours.
1.
Press
.
a
"h:01" appears on the display.
2.
Use
to set the required
start time for the wash cycle.
3.
Press
.
a
This activates the electronic de-
lay time.
Tip:
To deactivate the electronic
delay time, press
repeatedly
until "h:00" appears on the dis-
play.
12.6
Starting the wash
cycle
▶
Press
.
a
The wash cycle has ended
when the display shows
"0h:00m".
Notes
¡
If you want to add more dish-
ware while the appliance is run-
ning, do not use the collecting
tray as a handle for the upper
rack. You might touch the par-
tially dissolved tablet.
¡
You can only change a cycle in
progress if you can cancel it
first.
→
"Terminating the wash cy-
cle", Page 26
¡
To save energy, the appliance
switches off automatically
10 minutes after the end of the
wash cycle. If you open the ap-
pliance door immediately after
the wash cycle has ended, the
appliance will switch off after 4
seconds.
12.7
Activating the button
lock
The button lock prevents the ap-
pliance from being operated acci-
dentally or incorrectly while run-
ning.
▶
Press
for approx. 3 sec-
onds.
a
The button lock is activated and
will be automatically deacti-
vated at the end of the cycle.
a
flashes on the display
when the appliance is running.
a
The button lock remains acti-
vated with a power failure.
12.8
Deactivating the
button lock
▶
Press
for approx. 3 sec-
onds.
12.9
Interrupting the wash
cycle
1.
Press On/Off.
The program is saved and the
appliance switches off.
2.
Press On/Off.
3.
Press
to resume the wash
cycle.
12.10
Terminating the
wash cycle
To end a cycle early or to switch
from one that has already started,
you will need to cancel it first.
▶
Press
for approx.
4 seconds.
a
All displays light up.
a
As soon as the displays are off,
the display shows "0h:01m"
and the residual water is
pumped out.