Bosch SRZ2045UC Planning Guide - Page 5

6 | Bosch Custom Dishwasher Planning Guide Planning for your Custom Panel Dishwasher Before installing a Bosch dishwasher, be sure to verify the cabinet dimensions, electrical connections and water connections. Always consult the installation manual included with the product for complete details before installing. What to consider when installing a custom panel dishwasher Bosch dishwashers are designed to be surrounded by standard residential kitchen cabinetry. If the dishwasher is to be installed in a corner, make sure that there is adequate clearance of 27" to open the door. For SHV43P13UC, SHV65P03UC, and SHV68P03UC - Minimum opening height: 34" (860 mm) - Minimum opening width: 24" (610 mm) or 23 5⁄8" (600 mm) Wide with decor strips removed For SHV58E13UC and SHV68E13UC - Minimum opening height: 34 1 ⁄4" (865 mm) - Minimum opening width: 24" (610 mm) or 23 5⁄8" (600 mm) Wide with decor strips removed Bosch BA Custom Panel Dishwasher toekick C A B = Custom panel height Height from bottom edge C - Height of the of countertop toe-kick to floor Suggested dimensions for 34 1⁄2" countertop height and 4 1⁄2" toekick: - Suggested panel thickness: 3⁄4" - Suggested panel width: 23 1⁄4" - Suggested panel height: 30" - Suggested panel weight: 9-18 lbs Note: As all installations are different, please verify dimensions for your specific project. Installation options Custom panel models allow you to have a door panel made to match your cabinetry. The door panel can be a two-piece design (model 1 ) to look like a drawer at the top and a cabinet door at the bottom or a single full-length door (model 2 ). A template is included with the custom panel models to explain the mounting procedure. Additional templates can be ordered by calling customer service at 1-800-944-2904. NOTE: The door springs that are included with the custom panel units will provide proper function for custom door panels weighing between 9 and 18 pounds. SHV43P13UC, SHV65P03UC, and SHV68P03UC allow you to adjust the screw tension to accommodate for the weight of the door panel. SHV58E13UC and SHV68E13UC require no tension adjustment screws as the hinges self adjust to weights ranging from 9 to 18 pounds. 1 2 Bosch Custom Dishwasher Planning Guide | 7 Water and electrical locations For proper dishwasher operation and appearance, ensure the enclosure is square and the openings allow for passage of water, drain and electrical line. Select a location as close to the sink as possible for easy access to water supply and drain lines. In order to avoid interference with the dishwasher when sliding it into the cabinet, place your openings within the dimensions shown. Plumbing and electrical supply hoses must attach to the dishwasher within the shaded area. Note: Plumbing installations will vary - refer to local codes. The maximum length of the drain hose, including hose leading to air gap (if any) is 150" (3810 mm). Ensure a portion of the drain hose is raised at least 20" (508 mm) above the floor to ensure proper draining. 33/4" (95mm) 34"-35"(864-889 mm) 90° 24" (610 mm) 2" (50mm) 4" (100mm) 235/8" - 241/4" (600-616mm)* Special consideration for SHV58E13UC and SHV68E13UC 4 1⁄4" x 2" (108 x 52 mm) - To pass the included electrical supply junction box through to an adjacent cabinet 4" x 2" (100 x 50 mm) - To pass the included water supply line to the water supply 1 1⁄4" (32 mm) diameter - To pass the dishwasher drain hose to the drain connection NOTE: If the incoming electric supply, water supply and drain connections are all in the same cabinet, the one 4 1⁄4" x 2" (108 x 52 mm) hole will generally be large enough for all three parts to pass through. The dishwasher electrical supply junction box and dedicated receptacle must be mounted in an accessible cabinet adjacent to the dishwasher (do not mount the junction box or receptacle behind the dishwasher). The electrical supply can be connected in one of two ways: 1. Use the included three prong plug and junction box to connect to a dedicated household receptacle. 2. Permanently connect to household or field wiring 4"(100 mm) 4"(100 mm) 34"(867 mm) 34"(867 mm) 90° 2" 90° 24" (610 (50 mm) 2" mm) 24" (610 (50 mm) mm) Describes the space (if any) between cabinets and wall 24"-24¼" (61204-"6-1264¼m"m(6) 10-616 mm) Water Shut Off Valve Dishwasher Water Inlet Hose Dedicated Receptacle or Field Wiring Dishwasher Electrical Supply Junction Box Describes the cutout of adjoining cabinets Electric cord with junction box and three prong plug are included with dishwasher