Bosch WAT28401UC Instructions for Use - Page 22
Signal
View all Bosch WAT28401UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Removing laundry/switching the appliance off 1. Open the front door of the washer and remove the laundry. 2. Turn the cycle selector to the Off position. Appliance is switched off. 3. Turn off the water tap. NOTICES ▯ Do not leave any laundry in the drum. It can shrink or become discolored by the next laundry. ▯ Remove any remaining items from the drum and rubber gasket. ▯ Leave the front door and detergent drawer open so that any remaining water can dry. ▯ Always wait for the end of the cycle; otherwise the appliance may still be locked. If locked, switch the appliance on and wait until it unlocks. ▯ If at the end of the cycle the display is not lit up, the energy saving mode is active. To see display, press any button. Signal You can change the following settings: ▯ volume for button signals ▯ volume for indicator signals To change these settings always activate adjustment mode first. 2II Changing the volume You can set the volume by touching the Finish in button with the program selector in one of the following positions: ▯ Position 2: for indicator volume ▯ Position 3: for button signals volume 0 = off, 1 = soft, 2 = mid, 3 = loud, 4 = very loud Quit adjustment mode Turn the Cycle Selector to Off position. The settings were saved. Activate adjustment mode 1. Select Cotton Normal on Position 1. The appliance is on. 2. Hold down Start Pause and turn the Program Selector to the right (Position 2). Release Start Pause button. Adjustment mode is now activated and the default volume for indicator signals appears in the display. 22