Bose 44435 Owner's guide - Page 4

Using the optional stability enhancement accessories You may find the stability of the Bose® in-ear headphones is improved during certain activities, such as exercise, when using either the supplied lanyard or clothing clip. Either optional accessory will reduce some of the downward pull from the cord and may be used separately or together. Using the lanyard 1. Attach the headphone cord through the right (R) and left (L) lanyard connectors approximately 10 inches (25.4 cm) below each ear piece. CORRECT Important: Make sure the L and R marks point up toward the ear pieces. 2. Pull the lanyard over your head and allow it to rest behind your neck 3. Fit the headphones into your ears as described in the INCORRECT headphone owners' guide. 4. Adjust the lanyard connectors to make enough slack above the lanyard connectors so that any downward pulls on the plug end of the cord are not felt in the ears. Note: Lanyard has a built-in safety release that separates when forcefully pulled. Using the clothing clip 1. Attach the headphone cord to the connector on the back side of the clip. 2. Attach the clip high up on your shirt or collar, allowing for slack above the clip. 3. Adjust clip position until there is enough slack in the cord above the clip that any downward pulls on the plug end of the cord are not felt in the ears.