Home » Bose Manuals » Speakers » Bose 601Series IV » Manual Viewer

Bose 601Series IV Owner's guide - Page 2

Customer Information

Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

Customer Information Declaration of Conformity We, the offerer: Bose® Corporation, The Mountain, Framingham, MA 01701-9168 USA Acknowledge our sole responsibility, that the product: Kind of equipment: Loudspeaker Type designation: 601TM Series IV Direct/Reflecting® speaker In accordance with EMC Directive 89/336/EEC and Article 10 (1) of the Directive, is in compliance with the following norm(s) or document(s): Technical regulations: EN50081-1, EN50082-1 Accredited by Bose Corporation 1 May 2001 Bose Products B.V. Nijverheidstraat 8, 1135 GE Edam The Netherlands Nic Merks Vice President, Bose Europe Manufacturer's authorized EU representative 2

Section	Page
Warranty	3
For your records	3
Introduction	4
Figure 1	4
A natural balance of reflected and direct sound energy.	4
Unpacking the speakers	4
Figure 2	4
Package contents:	4
. 1 left speaker . 1 right speaker . Owner’s guide . 2 front speaker grilles . 2 rear speaker grilles	4
Attaching the speaker grilles	4
Placing the speakers	5
Figure 3	5
Ideal speaker placement	5
Figure 4	5
Place each speaker at least 2 feet (.6 m) from your TV screen.	5
Choosing the speaker cord	5
Running the speaker cord through a wall or under a floor	5
Preparing the speaker cord	6
Making the connections	6
Figure 5	6
Wiring schematic	6
1. Insert the marked wire into the red (+) terminal. Insert the plain wire into the black (-) terminal.	6
2. Tighten the knobs to secure the wires.	6
3. Connect the other ends of the wire to your receiver or amplifier.	6
A. Attach the marked wire at one end to the red (+) terminal.	6
B. Attach the plain wire at that end to the black (-) terminal.	6
4. Repeat steps 1, 2, and 3 for the right (R) speaker connections.	6
Checking the connections	7
For use in home theater	7
For rear or surround speakers	7
Setting your surround sound receiver or amplifier	7
Troubleshooting	8
1. Turn off the amplifier or receiver and check all the connections between the speakers and the amplifier or receiver.	8
2. Check your amplifier or receiver owner’s guide, since other components may be the cause of the problem.	8
3. Use the chart below as troubleshooting guidelines. If this does not solve the problem, contact your authorized Bose® dealer to arrange for service. Refer to the address list enclosed in the product packaging for correct phone numbers.	8
Technical information	9
Features	9
Speaker driver complement	9
Compatibility	9
Finish	9
Dimensions/Weight	9
Wire recommendations	9
Customer service	9