Bose Acoustic Wave II Acoustic Wave® power pack - Owner's guide - Page 5

English Deutsch Español Français Using The Power Pack Charging the power pack UsingThePowerPack Initial charging time for a new power pack is approximately four hours. After that, recharging may take up to three hours, depending on the amount of remaining charge in the power pack. 1. Plug the power supply output cord into the DC power input connector on the power pack (Figure 2). 2. Plug the small end of the AC power cord into the power supply. 3. Plug the AC power cord into a live AC (mains) outlet. Observe the power pack indicators while charging. 4. When the power pack reaches full charge (all indicators off), disconnect the power supply. Figure 2 Connecting the power supply Power pack Power supply output cord Power supply 2 3 1 Power pack indicators Charging progress: 1 flashing indicator - 1 to 25% 2 flashing indicators - 26 to 50% 3 flashing indicators - 51 to 75% 4 flashing indicators - 76 to 99% All indicators off - 100% 4 AC Power cord Italiano Nederlands Thai Korean S. Chinese Arabic 5