Home » Bose Manuals » Stereo Systems » Bose Acoustic Wave II » Manual Viewer

Bose Acoustic Wave II Acoustic Wave® SoundLink® adapter - Ow - Page 117

Controleer of het muziekprogramma actief is, het volumeniveau voldoende

View all Bose Acoustic Wave II manuals

Add to My Manuals
Save this manual to your list of manuals

Page 117 highlights

English Tab 2, 10 Tab 3, 11 Tab 4, 12 Tab 5, 13 Nederlands Tab 7, 15 Tab 8, 16 Probleem Geen geluid wanneer de computer geluid afspeelt. Wat te doen • Druk op de knop Soundlink/CD van de afstandsbediening van de SoundLink™ om de computer als de bron te selecteren. De tekst COMPUTER moet verschijnen. • Controleer het volumeniveau van het Acoustic Wave®-systeem en zorg ervoor dat het geluid niet is gedempt. • Controleer het volumeniveau van uw computer en controleer of het geluid niet is gedempt. • Controleer of het muziekprogramma actief is, het volumeniveau voldoende hoog is en of het geluid niet is gedempt. • Controleer bij de geluidsinstellingen van de computer of "Bose SoundLink Audio" is geselecteerd als het geluidsweergave-apparaat. • Sluit het muziekprogramma op uw computer af en start het opnieuw. • Start de computer opnieuw. 13

Section	Page
Lightwave AWMS Acc cover.pdf	1
ENG	2
Safety Information	2
Please read this owner’s guide	2
The lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the presence of uninsulated dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electrical shock.	2
The lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the presence of uninsulated dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electrical shock.	2
The exclamation point within an equilateral triangle, as marked on the system, is intended to alert the user to the presence of important operating and maintenance instructions in this owner’s guide.	2
Contents	5
Product parts	6
A. Using a kit with basic contents only	6
B. Using a kit with both basic and upgrade contents	6
1. Begin with “Upgrading your Acoustic Wave® music system, as needed” on page 3.	6
2. Proceed with “Preparing your Acoustic Wave® music system for wireless” on page 4.	6
SoundLinkTM USB key	6
Adapter power pack	6
Upgrading your Acoustic Wave® music system, as needed	7
1. Make sure your Acoustic Wave® music system is plugged in and ready to use. For detailed instructions, refer to the Bose® owner’s guide that came with the system.	7
2. Insert the update CD, label side up, into the disc drive on the system.	7
3. When UPDATE COMPLETED appears on the display, lift the CD player lid and remove the disc.	7
Preparing your Acoustic Wave® music system for wireless	8
1. Plug the SoundLinkTM adapter cable (with the words Bose link facing up) into the Bose link connector on the rear of the system.	8
Bose link cable	8
2. Place the adapter in a convenient location. It does not need to be within view.	8
If your kit includes an adapter power pack	9
1. On the rear of the SoundLinkTM adapter, insert the small end of the adapter power cable into the DC power connector.	9
2. Plug the other end of the power cable into an AC power outlet that is close to your system.	9
Preparing your computer	10
1. Using the provided SoundLinkTM remote control, press the SoundLink/CD button to select the computer as the music source.	10
2. With your computer turned on, lift the antenna on the SoundLinkTM USB key to the vertical position and plug the key into a USB port on your computer.	10
3. Check to be sure the SoundLinkTM USB key power light turns on and begins to flash.	11
Flashing power light	11
4. Wait for your computer to recognize the SoundLinkTM USB key. It may take up to 20 seconds the first time this occurs.	11
5. For best performance, set your computer volume control to the maximum level you use. Then open a music application or locate an Internet radio station and set the music to play.	11
To disconnect your Acoustic Wave® music system from the computer	12
Button	12
To reconnect to your Acoustic Wave® system	12
Listening to music on your computer	13
SoundLink/CD	13
Battery replacement	14
Troubleshooting	14
Manually linking the SoundLinkTM adapter and USB key	19
1. Using the provided SoundLinkTM remote control, press the SoundLink/CD button to select the computer as the music source.	19
2. Press and hold the Presets 5 button on the remote control until DISCOVERABLE is displayed and flashing on the Acoustic Wave® system display.	19
3. With your computer turned on, lift the antenna on the SoundLinkTM USB key to the vertical position and plug the key into a USB port on your computer.	19
4. Press and hold the button on the USB key for more than 3 seconds until the light begins to flash. When the USB power light changes from flashing to solid and the Acoustic Wave® system emits a beep, linking is complete.	19
Customer service	19
Limited warranty	20
1. Contact the Bose organization in your country/region (visit Global.Bose.com for Bose contact information in your country/region) for specific return and shipping instructions;	20
2. Label and ship the product, freight prepaid, to the address provided by the Bose organization in your country; and	20
3. Place any necessary return authorization number prominently on the outside of the carton. Cartons not bearing a return authorization number, where required, will be refused.	20
Technical information	21
Adapter power rating	21
Connection range	21
Dimensions	21
Weight	21
Computer requirements	21
Bose® system requirement	21
Bluetooth® QD ID	21
SoundLink adapter_OG_DEU_print	22
SoundLink adapter_OG_ESP_print	42
SoundLink adapter_OG_FRA_print	62
SoundLink adapter_OG_ITA_print	82
SoundLink adapter_OG_NED_print	102
SoundLink adapter_OG_THA Prn	122
SoundLink adapter_OG_KOR_print	142
SoundLink adapter_OG_CHS_print	162
AWMS_SoundLink adapter_AR_Print_Rev	182