Bose Acoustimass Bass Owner's guide - Page 6
Stereo, System, Before, start, Connecting, Acoustimass, shelf, speakers.
View all Bose Acoustimass Bass manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Connecting the Acoustimass® Bass System to Your Stereo System Step 1: Before you start Caution:Unplugyourreceiveroramplifier fromthe wall outlet. If your bookshelf speakers are already hooked up to your receiver or amplifier, disconnect them, too. A. You willfind four identical sets of wires packed with your Acoustimass Bass System. Two sets will connect theAcoustimass RatsSystem to yourreceiver oramplifier, the othertwo will connect your Bose bookshelf speakers to the Acoustimass Bass System. B. Examine the ends of the wires. In each set one wire willhavea red orother uniquemarker.For each connection you make, always connect the wire withthered (or other unique)marker to the "+" or red terminal. Step 2: Connecting your Acoustimass Bass System C. On your Acoustimass Bass System module, find the left channel terminals located near the bottom on thesystem's plasticend cap marked"INPUTS FROMAMPOR RECEIVER"(seeFigure4). Depress thered("+")tab.insert the lead with the red (orunique) marker (seeFigure5),and release the tab. Repeat the process for the black terminal and the other lead. D. Locate thespeaker outputs on youramplifier or receiver. Connect the other ends of the wire from the left channel of the Acoustimass Bass module to the terminals marked "L" or "LEFT." Make sure that theleadwith thered(orunique) markeris connected tothe"+"and the other lead is connected to the "-" terminal. E. Repeat steps CandD fortheright channel. Step 3: Connecting your Bose bookshelf speakers. F. On your Acoustimass Bass System module, find the left channel terminals marked "OUTPUTS TO SPEAKERS" located near the top of the plastic end cap (seeFrgure4). Depressthered ("+")tab, inserttheleadwith thered(or unique) marker, and release the tab. The lead should be held snugly in place by the terminal. Repeat the process for the black terminal and the other lead. G. Locate theterminalson therearof the bookshelf speaker to be used for the left side of the room. Connect the other end of the left channel wires from the Acoustimass Bass System to the left bookshelf speaker.Makesurethat thelead with • the red (or unique) marker is connected to the -+" or red terminal on your bookshelf speaker. Repeat the process for the black terminal and the other lead. H.Repeat stepsFand G fortheright channel. Step 4: Get ready...enjoy! I. Beforeyouplug inyourreceiver or amplifier.make sure that no strandsofwire fromany terminalare brushingagainst anyotherterminal.Such "bridged" wires createshodcircuitsthatcan damage your receiver or amplifier. J. Plug inyourreceiver, turnon your system,and enjoy your music! •