Bose CD3000 Owner's guide - Page 15

Operating Your Acoustic Wave® Music System Function To view number of tracks and total play time Press Stop I and then press CD Play/Pause . The display momentarily shows the total number of tracks and playing time of a CD. To automatically play the radio when a CD ends - Select the desired radio station. Press and hold the CD Play/Pause button. While holding the CD Play/Pause button , press and release the AM or FM button. The display flashes AM or FM to confirm your choice. CD Play/Pause Stop Skip/Scan CD Mode Acoustic Wave Music System TRACK AUX VOLUME CD AM FM STEREO PRESET REPEAT TRACK REPEAT DISC RANDOM MUTE Presets 1 2 3 4 5 Volume FM AM AUX On/Off Seek/Tune Control panel On Off Volume Seek Tune FM 1 AM 2 Mute AUX 3 CD 4 Skip Scan 5 Presets Acoustic Wave Music System Remote control Stop CD Play/Pause FM CD Play/Pause FM AM AM Figure 10 The CD display Current track number or CD play indicator total number of tracks TRACK CD RANDOM Elapsed or total playing time Current disc play mode Note: To prolong laser life, the CD player automatically turns off after 8 hours of continuous play. Also, if a CD is left unattended in pause mode, the system automatically turns off after 30 minutes. Listening to a component connected to AUX You can use your Acoustic Wave® music system to produce room-filling sound from an external source connected to the rear panel AUX inputs. See "Connecting external components to the system" on page 14 for information on connecting other sources. 1. Turn on the external source. 2. Press the AUX button on the Acoustic Wave® system to select the source and turn on the system. If the system is already on, just press AUX. The display should show "AUX" and the VOLUME level (Figure 11). 3. Adjust the volume of the source using the Volume L or M buttons. Control all other source functions at the external component. If necessary, refer to the owner's guide for the external component. Figure 11 The AUX display AUX VOLUME AM253543_03_V.PDF October 16, 2001 13