Bose CineMate 1 SR Home Theater Owner's guide - Page 5
Universal Remote Device Codes
View all Bose CineMate 1 SR Home Theater manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
CONTROLS AND INDICATORS 3. Press and hold until all five source buttons light. The remote is now in the setup mode. 4. Press . Only this button will remain lit. 5. On the number keypad, enter the device code for your brand of TV. The TV source button ( ) should blink twice and then turn off. Source buttons Source power buttons Note: If all five source buttons flash rapidly three times, the code was invalid. Go back to Step 1 and try another code. 6. Point the remote at your TV and press TV power. TV power If your TV does not respond, go back to Step 1 and try another code. To program the remote to control other devices: Follow the same procedure for each of your other devices, using the appropriate device code and source button for each one. To control a combination device: • If you are programming the remote to control a combination device that has more than one source, such as a VCR/DVD unit, you can program the associated code for either source button. For convenience, you may want to program the code twice - once for the VCR button and once for the DVD button. • To find the right device code, first search the "COMBINATION" listings in the Universal Remote Device Codes book. If you cannot find a valid code there, then search the listings for individual device types (TV, CBL, VCR, DVD, etc.). English - 5