Bose Lifestyle 235 Installation guide - Page 13

Continue with Kit - alternatives

Page 13 highlights

English TAB 2 TAB 3 TAB 4 5. Plug the free end of the speaker cable into the SPEAKERS connector on the Acoustimass® module. Tighten each fastener screw by hand to secure the plug. Fastener screw 6. Put the Acoustimass module in its final position: • Upright (BEST) or on either side (ALTERNATE). TAB 5 TAB 6 TAB 7 TAB 8 SYSTEM SETUP • When the position is determined, you can use the supplied rubber feet on the bottom surface of the module. You can locate these rubber feet when you open Kit 4. CAUTION: Do not put electronic media, such as video or audio tapes, on or next to the module for long periods of time. The magnetic field surrounding the module may erase some or all of the recorded material. CAUTION: DO NOT BLOCK the ventilation openings on the module. This can cause it to overheat. 7. Continue with Kit 4 on the next page. BEST ALTERNATE • With the front opening facing into the room. • At least 18 in (45 cm) from any TV to avoid magnetic interference with the TV image. Move it farther away if you still notice interference. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

9
S
YSTEM
S
ETUP
TAB 5
TAB 4
TAB 6
TAB 8
TAB 7
English
TAB 3
TAB 2
5.
Plug the free end of the speaker cable into
the
SPEAKERS
connector on the Acoustimass
®
module.
Tighten each fastener screw by hand to secure the
plug.
6.
Put the Acoustimass module in its final position:
Upright (BEST) or on either side (ALTERNATE).
With the front opening facing into the room.
At least 18 in (45 cm) from any TV to avoid
magnetic interference with the TV image. Move
it farther away if you still notice interference.
When the position is determined, you can use the
supplied rubber feet on the bottom surface of the
module.
You can locate these rubber feet when you open
Kit 4.
CAUTION:
Do not put electronic media, such as video or
audio tapes, on or next to the module for long periods of
time. The magnetic field surrounding the module may
erase some or all of the recorded material.
CAUTION:
DO NOT BLOCK the
ventilation openings on the module.
This can cause it to overheat.
7.
Continue with Kit
on the next page.
Fastener screw
ALTERNATE
BEST
4