Bose Lifestyle 3 Owner's guide - Page 37

discs, problems, operating, directly, selected, changer

Page 37 highlights

Make sure that all discs can be directly selected if you have problems operating your CD changer Note: This appliesonlytochangers thathave the direct:: functionandallownext discselection. Directselection c, .7 ispossibleonly from the deluxeremote control. 1. '.:axe sure that you have at least three discs loaded in your CD changer. You may need to try several different codes to find the one that lets the Lifestyle' remote contra operate your changer. Some manufacturers have used many different control codes for their CD changers over the years. or they have used one Control code for several different changer models. 2. Using the lifestyle' remote control, press AUX, then 3, then the blank key. 3. Operation is correct if your changer begins to play disc 3. If not, continue: 4. the AUX key. Make sure that your CD changer works with its own remote control If you nave trouble with direct seection of discs and tracks, use the following procedure to make sure that your CD changer works with its ownremote Control: 5. .a the CD cover by pressing on its latch. 6. PressSTORE once,and releaseit. 7. Use the MANUAL TUNING A / V keys until '2' appears in the display area. Note:Ifyouareusinga Pioneer 18-disc changer, use the MANUAL TUNING A /V keysuntil '3'appears. 8. T^ confirm the code you wish to enter, press the STORE o cancel the code entry, press the ERASE key. The disc-access code willdisappearfrom thedisplay. andthe frontofyourCE-1ControlExpander.'"unit willflash once. 9. Repeat Step 2above to verify that allCDs can be directly selected. Now, your Lifestyle' remote control should operate your CD chancier properly. If the problem persists, see "Customer Ser T page 39. To select discs and tracks on your CD changer Note: Directselectionofdiscsispossible only from the deluxe remotecontrol. Thestandardremotecontrolcanselect the next disc with theAUXkey. For a specific track, first press the number of the track, then press PLAY. For example. to go to track 14, press: 1.4-PLAY. For V' next disc, press the blank key (lower right on the deluxe rerr .ntrol). 1. Turn on your CD changer. Follow the instructions in your CD changer owner's manual to verify proper operation. Use the play/pause. fast forward, fast reverse, skip forward. skip reverse, and stop keys on the changer's remote control. 2. Load a disc with 10 or more tracks. Go directly to track 10. 3. Make sure you can go directly to any disc from any other disc. Make sure your CD changer works with the CE-1 Control Expander unit. 1. See -lismg yc,,r . afferent components.- page 35. Make sure you have followed those procedures properly. 2. Check the operation of the remote control for your music center. Try the ►/ II (play/pause). (fast forward). 44 (fast reverse), ►N (skip forward), 144 (skip reverse). and STOP keys. See "Using your remote control." page 36 3. If your CD changer still does not operate, try entering another control code for the same brand of changer. 4. Repeat Step 2 to make sure the CD changer works with your Lifestyle' remote control. Note: Manufacturers mayintroducenewproducts withnew controlcomics. MuseyourCE-1ControlExpander with these products, itmustbereprogrammed. Toarrange for this, please contactyourretaildealer, or callBase Corporation directly(see "Customer Service,"page 39). nee Doti.: :Is willWOrk onlyifyourchangerhasanext disc function.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43

Make
sure
that
all
discs
can
be
if
you
have
problems
operating
nee
directly
selected
Note:
This
applies
only
to
changers
that
have
the
direct-
::
function
and
allow
next
disc
selection.
Direct
selection
c
,
.7
is
possible
only
from
the
deluxe
remote
control.
1.
'.:axe
sure
that
you
have
at
least
three
discs
loaded
in
your
CD
changer.
2.
Using
the
lifestyle'
remote
control,
press
AUX,
then
3,
then
the
blank
key.
3.
Operation
is
correct
if
your
changer
begins
to
play
disc
3.
If
not,
continue:
4.
the
AUX
key.
5.
.a
the
CD
cover
by
pressing
on
its
latch.
6.
Press
STORE
once,
and
release
it.
7.
Use
the
MANUAL
TUNING
A
/
V
keys
until
'2'
appears
in
the
display
area.
Note:
If
you
are
using
a
Pioneer
18
-disc
changer,
use
the
MANUAL
TUNING
A
/V
keys
until
'3'
appears.
8.
T^
confirm
the
code
you
wish
to
enter,
press
the
STORE
o
cancel
the
code
entry,
press
the
ERASE
key.
Th
e
disc
-access
code
will
disappear
from
the
display.
and
the
front
of
your
CE
-1
Control
Expander
.
'"
unit
will
flash
once.
9.
Repeat
Step
2
above
to
verify
that
all
CDs
can
be
directly
selected.
Now,
your
Lifestyle'
remote
control
should
operate
your
CD
chancier
properly.
If
the
problem
persists,
see
"Customer
Ser
T
page
39.
To
select
discs
and
tracks
on
your
CD
changer
Note:
Direct
selection
of
discs
is
possible
only
from
the
deluxe
remote
control.
The
standard
remote
control
can
select
the
next
disc
with
the
AUX
key.
For
a
specific
track,
first
press
the
number
of
the
track,
then
press
PLAY.
For
example.
to
go
to
track
14,
press:
1.4
-PLAY.
For
V'
next
disc,
press
the
blank
key
(lower
right
on
the
deluxe
rerr
.ntrol).
Doti.:
:Is
will
WOrk
only
if
your
changer
has
a
next
disc
function.
your
CD
changer
You
may
need
to
try
several
different
codes
to
find
the
one
that
lets
the
Lifestyle'
remote
contra
operate
your
changer.
Some
manufacturers
have
used
many
different
control
codes
for
their
CD
changers
over
the
years.
or
they
have
used
one
Control
code
for
several
different
changer
models.
Make
sure
that
your
CD
changer
works
with
its
own
remote
control
If
you
nave
trouble
with
direct
seection
of
discs
and
tracks,
use
the
following
procedure
to
make
sure
that
your
CD
changer
works
with
its
own
remote
Control:
1.
Turn
on
your
CD
changer.
Follow
the
instructions
in
your
CD
changer
owner's
manual
to
verify
proper
operation.
Use
the
play/pause.
fast
forward,
fast
reverse,
skip
forward.
skip
reverse,
and
stop
keys
on
the
changer's
remote
control.
2.
Load
a
disc
with
10
or
more
tracks.
Go
directly
to
track
10.
3.
Make
sure
you
can
go
directly
to any
disc
from
any
other
disc.
Make
sure
your
CD
changer
works
with
the
CE
-1
Control
Expander
unit.
1.
See
-
lismg
yc,,r
.
afferent
components.
-
page
35.
Make
sure
you
have
followed
those
procedures
properly.
2.
Check
the
operation
of
the
remote
control
for
your
music
center.
Try
the
►/
II
(play/pause).
(fast
forward).
44
(fast
reverse),
►N
(skip
forward),
144
(skip
reverse).
and
STOP
keys.
See
"Using
your
remote
control."
page
36
3.
If
your
CD
changer
still
does
not
operate,
try
entering
another
control
code
for
the
same
brand
of
changer.
4.
Repeat
Step
2
to
make
sure
the
CD
changer
works
with
your
Lifestyle'
remote
control.
Note:
Manufacturers
may
introduce
new
products
with
new
control
comics.
M
use
your
CE
-1
Control
Expander
with
these
products,
it
must
be
reprogrammed.
To
arrange
for
this,
please
contact
your
retail
dealer,
or
call
Base
Corporation
directly
(see
"Customer
Service,"
page
39).