Bose Lifestyle T20 Installation guide - Page 11

or Direct/Reflecting - speakers

Page 11 highlights

English TAB 2 TAB 3 TAB 4 3. Place the rear speakers toward the back of the room behind the viewers at ear height (when seated) or higher, if possible. Left rear (LR) Right rear (RR) TAB 5 TAB 6 TAB 7 TAB 8 SYSTEM SETUP 4. Locate the colored connectors on the bottom panel of the Acoustimass module. Colored connectors • Make sure the 50 ft (15.2 m) rear speaker cables will reach from the speakers to the Acoustimass® module. • Aim the speakers away from the listeners to prevent them from pinpointing the exact location of the sound source. • If you have Jewel Cube® or Direct/Reflecting® cube speakers, rotate the cubes so that one cube of each speaker points forward into the room and the other points at a side wall to create reflected sound. 5. Plug the speaker cables into the Acoustimass module connectors. Be sure to match each cable plug to each connector by the color code. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

9
S
YSTEM
S
ETUP
TAB 5
TAB 4
TAB 6
TAB 8
TAB 7
English
TAB 3
TAB 2
3.
Place the rear speakers toward the back of the
room behind the viewers at ear height (when
seated) or higher, if possible.
Make sure the 50 ft (15.2 m) rear speaker cables
will reach from the speakers to the Acoustimass
®
module.
Aim the speakers away from the listeners to pre-
vent them from pinpointing the exact location of the
sound source.
If you have Jewel Cube
®
or Direct/Reflecting
®
cube speakers, rotate the cubes so that one
cube of each speaker points forward into the
room and the other points at a side wall to
create reflected sound.
4.
Locate the colored connectors on the bottom panel
of the Acoustimass module.
5.
Plug the speaker cables into the Acoustimass
module connectors. Be sure to match each cable
plug to each connector by the color code.
Left rear
(LR)
Right rear
(RR)
Colored connectors