Bose Model 111 Owners Guide - Page 8

Accessories Bose' Model SM-1 outdoor surface-mount brackets give sturdy support to Model 111 outdoor loudspeakers attached to a shelf, wall, ceiling, roof overhang, or boat. You can mount the brackets horizontally or vertically, and change the speaker's angle to direct the sound. Bose FM-1 outdoor flush-mount brackets securely anchor Model 111 outdoor loudspeakers to the bulkhead of a boat. These brackets install through the bulkhead surface, so only the speaker face and bracket trim are exposed. To order these brackets, or for more information about them, contact your authorized Bose retailer. Or see "For information" on page 10. • How to maintain Bose Model 111 outdoor loudspeakers Protect the connections The bare wire ends of the speaker cord can be affected by exposure to the elements. This is especially true of salt water exposure. You may use a silicone caulking material, such as RN adhesive, to protect the connections. It is commonly available at hardware stores. If you do use caulking, apply it only after the wires are connected and the knobs tightened down and the • connections are checked. Check the caulking annually, and re-apply as needed. How to clean the speakers Use a cloth dampened in mild detergent and water to remove dust or dirt from the outside of your Model 111 outdoor loudspeakers. Or use a hose to rinse them thoroughly with fresh water. Do not use enough pressure to force water behind the 8