Bose Model 301 Owner's guide - Page 10
Bose Model 301 Manual
View all Bose Model 301 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
• • • uncovered floors or scatter rugs, small amounts of furniture, hard walls) can be improved by the addition of rugs and heavy draperies, which also serve to eliminate echoes and standing waves. For acoustically "dead" rooms (e.g.. those with wall-to-wall carpets, heavily upholstered furniture, large amounts of draperies), furnishings should be arranged so that speakers have unobstructed sound transmission paths to the listening areas. Finally, since no room is acoustically perfect, you are encouraged to use your amplifier or receiver tone controls to adjust the sound for your maximum listening enjoyment. 5. TECHNICAL INFORMATION SPATIAL CHARACTERISTICS Asymmetrical Design for optimum stereo reproduction utilizing side wall reflections. A Direct Energy Control for adjustment of ratio of direct to reflected sound at high frequencies. SPEAKER COMPLEMENT Woofer: An 8-inch high efficiency design optimized for operation in a moderate size ported enclosure. The high frequency response is uniform to over 3 kHz for maximum utilization of the Dual Frequency Crossover Network. Tweeter: 3-inch high sensitivity design. This tweeter is designed for performance down to 1400 Hz and has exceptionally smooth and extended high frequency response. The on-axis frequency response rises at high frequencies to maintain constant total energy. Crossover Network: The crossover network utilizes a Dual Frequency design whereby the transition frequencies of the woofer and tweeter are separated by over one octave. The network consists of an inductor, two resistors, and a high grade film capacitor. Computer style wire-wrap connections are used for maximum reliability. Crossover transition frequencies are 1400 Hz and 3000 Hz. MINIMUM AMPLIFIER POWER - 10 watts rms into 8 ohms MAXIMUM AMPLIFIER POWER - 60 watts rms into 8 ohms (for reproducing speech and music) 10 SIZE - 17 inches wide by 10% inches high by 9% inches deep. SHIPPING WEIGHT - Forty pounds per pair. The Model 301s are packed one "Part 1" (left speaker) and one "Part 2" (right speaker) per shipping carton. 6. CARE AND MAINTENANCE The Model 301 has an attractive walnut vinyl veneer finish which may be cleaned by wiping with a soft cloth. The polyurethane foam grille of the Model 301 requires virtually no care, although it may be vacuumed or dusted if necessary. The loudspeaker and crossover elements of the Model 301 are designed for a long, maintenance-free life. Used properly, the Model 301 should provide you with many years of enjoyment. 7. IN CASE OF DIFFICULTY If you suspect a problem with one of your Model 301 speakers, it is worth a few minutes of your time to determine whether the defect is in your speaker or in some other portion of your high fidelity system. IF ONE SPEAKER SOUNDS DEFECTIVE, first disconnect the speaker that is operating properly by disconnecting the wire from the output terminals on the rear of the amplifier. Next, disconnect the wire running to the speaker which sounds defective and connect it to the output terminals of the amplifier channel which you are sure is operating properly. If the speaker now seems to be operating properly, the defect is in another part of your hi-fi. system. IF THE TROUBLE APPEARS IN BOTH CHANNELS, connect your Model 301s to another amplifying source or high fidelity system that is operating properly. If the trouble is no longer apparent, the difficulty is not with the speakers.