Bose Noise Cancelling 700 With Charging Case English Owners Guide - Page 59
REBOOT THE HEADPHONES, Release the Power
View all Bose Noise Cancelling 700 With Charging Case manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
TROUBLESHOOTING REBOOT THE HEADPHONES If the headphones are unresponsive, you can reboot them. Rebooting the headphones doesn't clear settings or connected devices. NOTE: Do not connect the USB cable to the headphones until instructed to do so. 1. Disconnect all cables from the headphones. 2. Connect one end of the USB cable to a USB-A wall charger or computer that is powered on. 3. Press and hold the Power/Bluetooth button while connecting the small end of the USB cable into the USB-C port on the right earcup. 4. Release the Power/Bluetooth button after 2 seconds. NOTE: You may need to reboot your headphones twice. | 5 9 E N G
59
|
ENG
TROUBLESHOOTING
REBOOT THE HEADPHONES
If the headphones are unresponsive, you can reboot them. Rebooting the headphones
doesn’t clear settings or connected devices.
NOTE:
Do not connect the USB cable to the headphones until instructed to do so.
1.
Disconnect all cables from the headphones.
2.
Connect one end of the USB cable to a USB-A wall charger or computer that is
powered on.
3.
Press and hold the Power/
Bluetooth
button while connecting the small end of the
USB cable into the USB-C port on the right earcup.
4. Release the Power/
Bluetooth
button after 2 seconds.
NOTE:
You may need to reboot your headphones twice.