Bose Solo 5 TV Sound Multilingual Owners Guide - Page 21

U sing the S ystem 2. Based on your source's response to basic functions: • Remote responds accurately: press settings. to exit programming and save your • Remote does not respond or does not respond accurately: - If your source button glows: press on the volume button to move to the next code. Repeat steps 1 - 2 in "Test your source's code." You may need to repeat this procedure 30 or more times. If all six buttons blink three times, you have cycled through all codes for your source. - If your source button is off: your remote exited programming mode. ­Repeat steps 1 - 2 in "Enter your source's code" and steps 1 - 2 in "Test your source's code." Tip: After you exit programming mode, press the appropriate source button to use your source. Note: Your source may not be compatible with universal remote controls or may not accept IR (infrared) signals. Refer to your source's owner's guide for more ­information. Customizing the power button You can customize (power button) on your remote to power on/off your ­soundbar, TV and cable/satellite box simultaneously. 1. Program your remote to control your TV and cable/satellite box (see page 20). 2. Press and simultaneously and hold for 10 seconds. Both buttons flash three times. Resyncing your cable/satellite box and TV After customizing the power button, your cable/satellite box and TV may become out of sync and not power on/off simultaneously. Use the following steps to resync your soundbar. 1. Press the source button for the source that is out of sync. 2. Press to power on/off the source. 3. Press . Your sources power on/off simultaneously. ENGLISH - 21