Bose SoundTouch 520 Home Theater Owners Guide

Bose SoundTouch 520 Home Theater Manual

Get Bose SoundTouch 520 Home Theater PDF manuals and user guides View all Bose SoundTouch 520 Home Theater manuals
Add to My Manuals
Save this manual to your list of manuals

Bose SoundTouch 520 Home Theater manual content summary:

  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 1
    CineMate® 520 home theater system Owner's Guide │ Guía del usuario │ Notice d'utilisation
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 2
    . It is neither designed nor tested for use outdoors, in recreational vehicles, or on boats. • The speaker wire and interconnect cables included with the system are not approved for in-wall installation. Please check your local building codes for the correct type of wire and cable required for in
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 3
    openings. Install in ­accordance with the manufacturer's instructions. 8. Do not install near any time. 12. Refer all servicing to qualified service personnel. ­Servicing is required when the apparatus or modifications not expressly approved by Bose Corporation could void the user's authority
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 4
    O O O O O Plastic parts O O O O O O Speakers X O O O O O Cables X O O O O O you keep your receipt with this owner's guide. Blu-ray Disc™ and Blu-ray™ Inc. All Rights Reserved. SoundTouch and the wireless note design are trademarks of Bose Corporation in the U.S. and
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 5
    520 home theater system 7 System Features...7 Introducing SoundTouch™ from Bose 7 Unpacking the system...8 Placement guidelines...9 Sample system 16 Starting Up the System Installing the remote control's batteries 17 Powering on the system...17 Finishing Setup Checking for sound...18 Changing
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 6
    source 23 Source selection...24 Select a source connected to the Bose® system 24 Select a source connected to your TV 24 Universal Troubleshooting...29 If your console cannot find the Acoustimass® module 30 Factory reset the system 31 Reset a source button on the remote control 31 Service
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 7
    Introduction About your CineMate® 520 home theater system The CineMate 520 system delivers spacious, true 5.1 surround sound from small, high-performance speakers for consistent audio performance regardless of content, source or room layout. System Features • Advanced Bose audio processing provides
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 8
    system Carefully unpack the carton and confirm that the following parts are included: Acoustimass® module Console (4) Speakers Center speaker Front speaker cable Rear speaker part of the system is damaged, do not use it. Contact your authorized Bose® dealer or Bose customer service. Refer to the
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 9
    m) of the console. • If you have the SoundTouch™ wireless adapter, you can begin set up. Refer to the SoundTouch™ wireless adapter's owner's guide for more information. Note: Do not connect the adapter to the console until prompted by the SoundTouch™ app. Sample system placement  English - 9
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 10
    Setting Up the Acoustimass® Module Attaching the rubber feet to the Acoustimass module Attach the rubber feet to the Acoustimass module to protect your floor. 1. Turn the Acoustimass module upside down onto a soft surface to protect it from being damaged. 2. Attach the rubber feet to the bottom of
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 11
    Setting Up the Acoustimass® Module Connecting the Acoustimass module to power 1. Plug the power cord into the connector on the Acoustimass module. 2. Plug the power cord into an AC (mains) outlet. English - 11
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 12
    1. Insert the front speaker cable's L plug into the left speaker. 2. Insert the front speaker cable's C plug into the center speaker. 3. Insert the front speaker cable's R plug into the right speaker. 4. Insert the other end of the front speaker cable into the 6-pin Speaker Connections connector on
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 13
    other end of the rear speaker cable into the 4-pin Speaker Connections connector on the console. Wall mounting the speakers You can mount the speakers on wall brackets, floor stands or table stands. To purchase these accessories, contact your local Bose dealer or visit www.Bose.com CAUTION: Do not
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 14
    to your TV. 1. Disconnect your HDMI-connected sources, such as a cable/satellite box, DVD or Blu-ray Disc™ player or game system, from your TV. 2. Insert one end of the Bose® HDMI cable into the TV connector on the console. 3. Insert the other end of the HDMI cable into your TV's HDMI
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 15
    Without this secondary connection, you may not hear audio from the Bose® system. Use a secondary connection in the following configurations • You are using • You are connecting sources to your TV. Refer to your TV owner's guide for more information. Tip: If your TV has IN and OUT audio connector
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 16
    using audio and video cables (available separately). Refer to your TV owner's guide for more information. Tip: If your source has IN and OUT audio analog input for the appropriate source. You can access these settings using the System menu (see page 26). Connecting the console to power 1. Plug the
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 17
    Starting Up the System Installing the remote control's batteries 1. Slide open the battery markings inside the compartment. 3. Slide the battery compartment cover back into place. Powering on the system Press on the remote. The console powers on. The display defaults to CBL SAT for first
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 18
    input. You may need to use a different remote. 3. Power on the system. 4. Press the appropriate source button. 5. Check if sound is coming from the Bose® speakers. Note: If you do not hear sound from the Bose speakers, see "Troubleshooting" on page 29. 6. Press on the remote control. Check that no
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 19
    Finishing Setup Running the ADAPTiQ® audio calibration The ADAPTiQ audio calibration customizes the sound of the system to ADAPTiQ appears on the display. 5. Press . 6. Follow the voice prompts until the system completes the process. 7. Unplug the ADAPTiQ headset from the console and store it in
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 20
    connected to your TV Navigation pad Toggles between SoundTouch™ (available separately) and connector Powers on/off the Bose® system Powers on/off a selected source Lists recorded DVR programs System menu Displays the Internet TV home page Previous channel, chapter or track Playback controls
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 21
    sources without programming the remote. You can turn on/off CEC using the System menu (see page 26). Your source may support CEC, but refer to it with a different name. Refer to your source owner's guide for more information. CEC controls sources connected to the console's HDMI connectors. Tip
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 22
    CEC Test each of your sources for CEC using the remote control. Note: Your HDMI-connected source may not support CEC. Refer to your source owner's guide for more information. 1. Power off the Bose® system. 2. Prepare your source: • If you are testing your TV, power off your TV. • If you are testing
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 23
    Using the System Program the remote to control your source If your source does not support CEC, you can program the remote to navigate. . The programming guide appears. • DVD or Blu-ray Disc™ player: press Press and to navigate. . The settings menu appears. • Game system: press and to navigate
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 24
    source button on the remote control. Before you begin, program the remote to control your source (see page 23). Select a source connected to the Bose® system If your source is connected to the console and does not use CEC, follow this procedure to set the console to the appropriate mode and
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 25
    remote control You can program a non-Bose remote control, such as your cable/satellite box remote, to control the system. Refer to your non-Bose remote control owner's guide or cable/satellite website for instructions. Once programmed, the non-Bose remote controls basic functions such as power on
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 26
    no sound coming from the system). Disable: The system will not automatically power off. Audio in: (Default) Sets the connector for an auxiliary source. Headphones: Sets the connector as a headphones input. Note: If set to Headphones input and a cable is connected, the speakers are muted. Disconnect
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 27
    SET OPTICAL INPUT 12 SET COAXIAL INPUT 13 SET ANALOG INPUT 14 ADAPTIQ 15 PAIR ACOUSTIMASS 16 FACTORY RESET System state Adjusts the volume of the rear speakers relative to front speakers. Changes the language on the console and ADAPTiQ®. Sets the optical connector to Auto/TV (Default), CBL SAT, BD
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 28
    connected to the connector on the console. Call Bose® customer service. Refer to the contact sheet in the carton. Acoustimass module status indicator The status indicator on the back of the Acoustimass module provides information on system activity. Indicator activity Amber Blinking amber Slow
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 29
    Troubleshooting Care and Maintenance Problem What to do No power • Secure the Acoustimass® module's and console's power cords. • Reconnect the Acoustimass module's and console's power cords firmly into an AC (mains) outlet. • Use the remote control to power on the system. • Factory reset the
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 30
    Care and Maintenance Problem Poor or distorted sound Intermittent sound What to do • Remove all protective films from the system. • Secure all cable connections on the speakers, TV, and connected sources. • If you see the error message Cannot find Acoustimass: -- Plug in the Acoustimass® module.
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 31
    Care and Maintenance Factory reset the system To troubleshoot problems, reset the System menu and ADAPTiQ® to the factory settings. 1. Press on the remote control. 2. Press until 16 FACTORY RESET appears on the display. 3. Press 5. The system resets. 4. Run the ADAPTiQ audio calibration (see
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 32
    help, contact Bose® Customer Service. Refer to the contact sheet in the carton. Limited warranty Your system is covered by a limited warranty. Details of the limited warranty are provided on the product registration card that is in the carton. Please refer to the card for instructions on how to
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 33
    Care and Maintenance English - 33
  • Bose SoundTouch 520 Home Theater | Owners Guide - Page 34
    ©2014 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM715113 Rév. 00
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
CineMate
®
520
home theater system
Owner's Guide │ Guía del usuario │ Notice d’utilisation