Bose V-300 Owner's guide - Page 6
Position, surround, speakers
View all Bose V-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Setting Up Figure 4 Alternate choices for al) placing the surround speakers I Surround speakers Position your surround speakers Surround speakers in the V-300''' speaker set provide surround sound effects from the rear of your viewing area (Figure 4). Brackets that come with these speakers allow you to mount them on the wall or ceiling. If you use the supplied brackets, refer to the bracket instructions in the Appendix. Do not connect the speakers before reading those instructions. If you prefer, set the speakers on a table or shelf in a horizontal or vertical position. For accurate surround sound: • Place these speakers behind the general viewing area, along the rear wall or to the rear of side walls. • Make sure they are at least 2 feet (.6 m) from your video screen. • Place both speakers at the same height. • Place the speakers as far apart as your room allows. • To mount the speakers on brackets, be sure to leave room to tighten the bracket screw. • To stand the speakers horizontally or vertically, apply the rubber feet to their bottom surface (Figure 5). CAUTION: Do not place the surround speakers within No feet of your video screen. They are not magnetically shielded and will cause serious video inter, once if placed too to the screen. CAUTION: The bracket screw must be inserted from the bottom on a vertically mounted bracket. Figure 5 Self-adhesive feet on the bottom of a surround speaker in horizontal or vertical position • Self-adhesive feet 6 Self-adhesive feet