Bose Wave Radio III Owner's guide - Page 17
Setting the room code, Turning the touch pad, on or off - remote control
View all Bose Wave Radio III manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Setting the room code Your Wave® radio III comes from the factory ready to operate as a second room (room code B) when connected to a Bose® link enabled Lifestyle® system. If you want to use your Wave® radio III with your Lifestyle® system beyond a second room you will need to change the room code to match that of the remote control you are using for that room. Refer to your Lifestyle® system owner's guide for more information on room codes. 1. Press and hold Alarm Setup (Menu) until -SETUP MENU- is displayed. 2. Press Tune/Playlist > six times until ROOM- B is displayed. The dashes following the room letter indicate how the microswitches should be set on the Lifestyle® remote control. 3. Press Time - or Time + to select a room code other than room B. 4. Press Alarm Setup (Menu) to exit the setup menu or wait 10 seconds for the setup menu to exit automatically. PERSONALIZING YOUR WAVE® RADIO III Turning the touch pad on or off If you do not wish to use the touch pad feature you can turn it off. 1. Press and hold Alarm Setup (Menu) until -SETUP MENU- is displayed. 2. Press Tune/Playlist > seven times until TOUCH PAD- is displayed. 3. Press Time - or Time + to select OFF or ON. 4. Press Alarm Setup (Menu) to exit the setup menu or wait 10 seconds for the setup menu to exit automatically. English - 17