Boss Audio 758DBI User Manual in English - Page 3

Setting Mode You can make changes to the system setting in the following area: Radio Frequency Range + Enable/Disable AUX In+ Clock Format To enter setting mode, input the following command by pressing remote keys" 8, DOWN DIRECTION KEY, 9, ENTER " The display will show "TEST MOD " breifly to indicate you are in system setting area and then automatically change to Radio Frequency selection mode. At anytime, you can press the DOWN ARROW to step through the above areas. When you are ready to leave the System Setting area, press ENTER. The unit will reboot to initialize with the new setting. - Radio Settings The unit can operate on several different frequency ranges. Please see the following for these ranges. BAND NAME AMERICA 1 AMERICA 2 AMERICA 3 EUROPE MIDEAST AUST(AUSTRALIA) RUSSIA FREQUENCY RANGE FM:87.5-107.9MHz FM:87.5-108MHz FM:87.5-107.9MHz FM:87. 5-108 MHz F M:87. 5 - 108 MHz FM:87. 5 - 108 MHz FM:65.0-108MHz AM:530-1710kHz AM:520-1620kHz AM:530-1620kHz AM:522-1620kHz AM:531-1602kHz AM:522-1710kHz AM:522-1620kHz To change the range to suit your location, press DOWN ARROW unit the desired frequency range is hight lighted. The press ENTER to save it and move to next setting area. - AUX Input Enable/Disable Press DOWN ARROW to move between Enable and Disable modes. When the selection has been made, press ENTER to save it and move to next setting area. If AUX Input is disable in System Settings, any input connected will not be played. - Clock Format (12-hour or 24-hour) Press DOWN ARROW to move between 12-hour or 24-hour format, press ENTER to save it and turn off this unit. Page 10 PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com General and Radio Controls 7 5 3 11 1 9 RPT RDM 1 2 3 TA 2 MODE ENTER 4 5 6 AF -10 +10 AUX IN 6 8 10 12 4 1. VOLUME UP/DOWN KNOB (turn)& AUDIO MODE SELECTOE (push) In normal mode, use this knob to increase or decrease the volume level. To access the various sound parameters push the knob (like a button) to cycle through the following adjustable settings: VOLUME -> BASS ->TREBLE -> BALANCE -> FADER Use the knob to increase or decrease the settings for Volume, Bass, Treble, Balance and Fader. In each mode, the waiting time is about 5 seconds, and the time waiting time is over, it returns to the last display mode . The control mode of E.VOL is operated with following numeric display. - VOL: (MIN)00, 01,......46, 47(MAX). - BASS/TRE: -07, -06,...,00,...+06,+07 - BAL: 0LR9, 1LR9, ..., 9LR9,..., 9LR1, 9LR0 - FAD: 0FR9,1FR9, ..., 9FR9,..., 9FR1, 9FR0 Push and hold the knob (like a button) for more than 2 seconds to turn on TA ON/TA OFF, then push it and repeatedly to select TA SEEK/TA ALARM, PI SOUND/PI MUTE, RETUNE S/RETUNE L, MASK DPI/MASK ALL, BEEP ON /BEEP OFF, USER SET(FLAT, CLASSIC, ROCK, POP), VOL LAST/ VOL DEFA, STEREO/MONO(in RADIO mode), LOUND ON/LOUND OFF, DX/LOCAL(in RADIO mode), CLK ON/CLK OFF, CLK 12/CLK 24 mode. Use the knob to increase or decrease the settings for these functions. 2. POWER/MUTE Press POWER to turn unit on. Press the button to MUTE the audio. Press and hold POWER to turn it off. 3. MODE (Input Select) Press this button repeatedly to cycle through the audio input sources: BLUETOOTH > AUX >TUNER > USB > CARD > IPOD Please note: iPod Mode can only be selected if an iPod is present in the dock. Page 1